Docomo FOMA P704i, Manual

Page: 490 / 495

53
■ 64K Data Communication
■ Packet Communication
■ Result Code List
■
Extended Result Code List
For &E0
Connection speed between the FOMA phone and the base station is
displayed.
For &E1
Disconnection Reason List
Value Reason
1 The specified number does not exist.
16 The line was normally disconnected.
17 Cannot communicate because the other party is communicating.
18 Dialed but no response has come in within the specified duration.
19 Cannot communicate because the other party is dialing.
21 The other party rejected to receive the call.
63 The network service and options are not valid.
65 The specified transmission performance is not provided.
88 Dialed to or received the call from the phone with different properties.
Value Reason
27 No APN was found; or an invalid APN was specified.
30 The line was disconnected from the network.
33 You have not applied for the service option you requested.
36 The line was normally disconnected.
Result Codes
Numeric
notation Character
notation
Meaning
0 OK Processing has been executed
normally.
1 CONNECT The line has been connected to the
other party.
2 RING An incoming call has arrived.
3 NO CARRIER The line has been disconnected.
4 ERROR The system can receive no
command.
6 NO DIALTONE The system can detect no dial tone.
7 BUSY The system is detecting the busy tone.
8 NO ANSWER The connection completed; timeout
100 RESTRICTION The network is restricted.
101 DELAYED Within restricted redialing time
Numeric
notation Character
notation
Connection speed
121 CONNECT 32000 32,000bps
122 CONNECT 64000 64,000bps
125 CONNECT 384000 384,000bps
Numeric
notation Character
notation
Connection speed
5 CONNECT 1200 1,200bps
10 CONNECT 2400 2,400bps
11 CONNECT 4800 4,800bps
13 CONNECT 7200 7,200bps
12 CONNECT 9600 9,600bps
15 CONNECT 14400 14,400bps
16 CONNECT 19200 19,200bps
17 CONNECT 38400 38,400bps
18 CONNECT 57600 57,600bps
19 CONNECT 115200 115,200bps
20 CONNECT 230400 230,400bps
21 CONNECT 460800 460,800bps
■ Communication Protocol Result Code List
■
Result Code Display Examples
p
When ATX0 is set:
CONNECT only appears at completion of the connection, regardless of
the contents specified in the AT¥V command (see page 51).
Example in character notation: ATD
_
99
___
1#
CONNECT
Example in numeric notation: ATD _ 99 ___ 1#
1
p
When ATX1 is set
※
:
･ If ATX1 and AT¥V0 are set (default):
A result code appears in the following format at completion of the
connection: CONNECT<baud rate between the FOMA phone and PC>
Example in character notation: ATD _ 99 ___ 1#
CONNECT 460800
Example in numeric notation: ATD
_
99
___
1#
1 21
･ If ATX1 and AT¥V1 are set
※
:
A result code appears in the following format at completion of the
connection: CONNECT<baud rate between the FOMA phone and
PC>PACKET<access point name (APN)>/<maximum baud rate for
upload (the FOMA phone → wireless base station)>/<maximum
baud rate for download (the FOMA phone
←
wireless base station)>
Example in character notation: ATD _ 99 ___ 1#
CONNECT 460800 PACKET
mopera.ne.jp /64/384
(Indicates that the FOMA phone
connected to mopera.ne.jp at
maximum 64 kbps for upload and
maximum 384 kbps for download.)
Example in numeric notation: ATD _ 99 ___ 1#
1215
※ If you specify ATX1 and AT¥V1 at the same time, you may not be
able to correctly carry out the dial-up connection.
You are advised to use only AT¥V0.
Information
p Result codes are displayed in the character notation (default) when the
ATVn command (see page 51) is set to n=1 and displayed in the
numeric notation when it is set to n=0.
p The baud rate is displayed to keep the compatibility with a conventional
modem connected via RS-232C. However, the FOMA phone and
personal computer are connected via the FOMA USB Cable (option);
so, the baud rate is different from the actual connection speed.
p “RESTRICTION” (numeric notation: 100) means that the
communication network is congested. If this result code appears, wait
for a while, then connect the line again.
Numeric
notation
Character notation Meaning
1 PPPoverUD Connected by 64K data
communication
2 AV32K Connected by 32K
videophone
3 AV64K Connected by 64K
videophone
5 PACKET Connected by packet
communication
Aug ’07 (Ver.1.0)
F0807F0