Docomo FOMA P704i, Manual

Page: 72 / 495

70
Voice/Videophone Calls
Public Mode is an auto-answer service that puts importance on manners in public spaces. Once you activate
Public Mode, the guidance is played back telling that you cannot answer the call as you are currently driving or
in a place (a train, bus, movie theater, etc.) where you should refrain from answering the call. Then the call is
disconnected.
1
Stand-by display
a
(for at least one second)
Public Mode is activated and “ ” is displayed.
When a call comes in, the guidance “The person you are calling is currently driving or in an area where cell phone
should not be used. Please try again later.” is played back for incoming calls.
p
To deactivate Public Mode, perform the same operation. Then, Public Mode is deactivated and “ ” disappears.
Public Mode (Drive Mode)
Using Public Mode (Drive Mode)
Setting at purchase Released
< >
Information
p You can activate/deactivate Public Mode only from the Stand-by display. You can activate/deactivate Public Mode even
when “ ” is displayed.
p
You can make calls as usual even during Public Mode.
p
If you make an emergency call at 110/119/118, Public Mode is released.
p
When Public Mode and Manner Mode are activated simultaneously, Public Mode has priority.
p If a “User unset” call comes in while “Caller ID request” is set to “Activate”, the Caller ID Request guidance is played back.
(The Public Mode guidance is not played back.)
p You cannot use this function during data communication.
■ When Public Mode (Drive Mode) is activated
・ Even when a call comes in, the ring tone does not sound. The “Missed call” icon appears on the display and the call is
stored in “Received calls”. The guidance is played back to the caller to the effect that you are currently driving or in an area
where mobile phones should not be used. Then the call is disconnected.
However, when the power is off or “ ” is displayed, the caller hears the out-of-service area guidance instead of the
Public Mode guidance.
・
The ring tone does not sound and the Call/Charging indicator does not flicker even when mail or a message comes in. In
addition, the set vibrator does not work.
・ The ring tone for 64K data communication, alarm tone, and charging confirmation tone do not sound, and a melody while
i-
α
ppli is running is not played back.
・ The tickers of i-Channel are not displayed.