Dell S4820T, Configuration Manual

Page: 977 / 1178

Recover from a Card Problem State on an S-Series Stack
If a unit added to a stack has a different Dell Networking OS version, the unit does not come online and
Dell Networking OS cites a card problem error.
To recover, disconnect the new unit from the stack, change the Dell Networking OS version to match the
stack, and then reconnect it to the stack.
Example of Card Problem Error on an S-Series Stack - Different Dell Networking OS Versions
stack-1#show system brief
Stack MAC : 00:01:e8:8a:fd:6e
Reload Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
-----------------------------------------------------------
0 Standby card problem S4810 unknown 64
1 Management online S4810 S4810 8-3-10-223 64
2 Member not present
3 Member not present
4 Member not present
5 Member not present
6 Member not present
7 Member not present
8 Member not present
9 Member not present
10 Member not present
11 Member not present
-- Power Supplies --
Unit Bay Status Type FanStatus
------------------------------------
0 0 down DC down
0 1 up DC up
1 0 absent absent
1 1 up AC up
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
--------------------------------------------
0 0 up up 9360 up 9360
0 1 up up 9600 up 9360
1 0 up up 6720 up 6720
1 1 up up 6960 up 6720
Speed in RPM
stack-1#
Recover from a Card Mismatch State on an S-Series Stack
A card mismatch occurs if the stack has a provision for the lowest available stack number which does not
match the model of a newly added unit.
To recover, disconnect the new unit. Then, either:
Stacking
977