Dell S4820T, Configuration Manual

Page: 593 / 1178

Type TLV Description
127 Port-VLAN ID On Dell Networking systems,
indicates the untagged VLAN to
which a port belongs.
127 Port and Protocol VLAN ID On Dell Networking systems,
indicates the tagged VLAN to
which a port belongs (and the
untagged VLAN to which a port
belongs if the port is in Hybrid
mode).
127 Protocol Identity Indicates the protocols that the
port can process. Dell
Networking OS does not
currently support this TLV.
IEEE 802.3 Organizationally
Specific TLVs
127 MAC/PHY Configuration/Status Indicates the capability and
current setting of the duplex
status and bit rate, and whether
the current settings are the result
of auto-negotiation. This TLV is
not available in the Dell
Networking OS implementation
of LLDP, but is available and
mandatory (non-configurable) in
the LLDP-MED implementation.
127 Power via MDI Dell Networking supports the
LLDP-MED protocol, which
recommends that Power via MDI
TLV be not implemented, and
therefore Dell Networking
implements Extended Power via
MDI TLV only.
127 Link Aggregation Indicates whether the link is
capable of being aggregated,
whether it is currently in a LAG,
and the port identification of the
LAG. Dell Networking OS does
not currently support this TLV.
127 Maximum Frame Size Indicates the maximum frame
size capability of the MAC and
PHY.
Link Layer Discovery Protocol (LLDP)
593