1 Interface ip routing Tunnel 1 Up 00:02:16
2 Interface ipv6 routing Tunnel 2 Up 00:03:31
3 IP Host reachability 42.1.1.2/32 Up 00:00:59
4 IP Host reachability 43.1.1.2/32 Up 00:00:59
Apply the Redirect Rule to an Interface:
Dell#
Dell(conf)#int TenGigabitEthernet 2/28
Dell(conf-if-te-2/28)#ip redirect-group redirect_list_with_track
Dell(conf-if-te-2/28)#end
Verify the Applied Redirect Rules:
Dell#show ip redirect-list redirect_list_with_track
IP redirect-list redirect_list_with_track
Defined as:
seq 5 redirect 42.1.1.2 track 3 tcp 155.55.2.0/24 222.22.2.0/24, Track 3
[up], Next-hop reachable (via Vl 20)
seq 10 redirect 42.1.1.2 track 3 tcp any any, Track 3 [up], Next-hop
reachable (via Vl 20)
seq 15 redirect 42.1.1.2 track 3 udp 155.55.0.0/16 host 144.144.144.144,
Track 3 [up], Next-hop reachable (via Vl 20)
seq 20 redirect 42.1.1.2 track 3 udp any host 144.144.144.144, Track 3 [up],
Next-hop reachable (via Vl 20)
seq 25 redirect 43.1.1.2 track 4 ip host 7.7.7.7 host 144.144.144.144, Track
4 [up], Next-hop reachable (via Vl 20)
Applied interfaces:
Te 2/28
Dell#
Configuration Tasks for Creating a PBR list using Explicit Track Objects for Tunnel Interfaces
Creating steps for Tunnel Interfaces:
Dell#configure terminal
Dell(conf)#interface tunnel 1
Dell(conf-if-tu-1)#tunnel destination 40.1.1.2
Dell(conf-if-tu-1)#tunnel source 40.1.1.1
Dell(conf-if-tu-1)#tunnel mode ipip
Dell(conf-if-tu-1)#tunnel keepalive 60.1.1.2
Dell(conf-if-tu-1)#ip address 60.1.1.1/24
Dell(conf-if-tu-1)#ipv6 address 600:10::1/64
Dell(conf-if-tu-1)#no shutdown
Dell(conf-if-tu-1)#end
Dell#
Dell#configure terminal
Dell(conf)#interface tunnel 2
Dell(conf-if-tu-2)#tunnel destination 441:10::2
Dell(conf-if-tu-2)#tunnel source 441:10::1
Dell(conf-if-tu-2)#tunnel mode ipv6
Dell(conf-if-tu-2)#tunnel keepalive 601:10::2
Dell(conf-if-tu-2)#ipv6 address 601:10::1/64
Dell(conf-if-tu-2)#no shutdown
Dell(conf-if-tu-2)#end
Dell#
Create Track Objects to track the Tunnel Interfaces:
Dell#configure terminal
Dell(conf)#track 1 interface tunnel 1 ip routing
738
Policy-based Routing (PBR)
Summary of Contents for S4820T
