Dell S4820T, Configuration Manual

Page: 864 / 1178

•
Secret
: Specify the secret for the user.
2. Configure a password for privilege level.
CONFIGURATION mode
enable password [level level ] [ encryption-mode ] password
Configure the optional and required parameters:
•
level level
: specify a level from 0 to 15. Level 15 includes all levels.
•
encryption-type
: enter 0 for plain text or 7 for encrypted text.
•
password
: enter a string up to 32 characters long.
To change only the password for the
enable
command, configure only the
password
parameter.
3. Configure level and commands for a mode or reset a command’s level.
CONFIGURATION mode
privilege mode {level level command | reset command }
Configure the following required and optional parameters:
•
mode
: enter a keyword for the modes (
exec
,
configure
,
interface
,
line
,
route-map
, or
router
)
•
level level
: the range is from 0 to 15. Levels 0, 1, and 15 are pre-configured. Levels 2 to 14 are
available for custom configuration.
•
command
: an Dell Networking OS CLI keyword (up to five keywords allowed).
•
reset
: return the command to its default privilege mode.
Examples of Privilege Level Commands
To view the configuration, use the
show running-config
command in EXEC Privilege mode.
The following example shows a configuration to allow a user john to view only EXEC mode commands
and all
snmp-server
commands. Because the
snmp-server
commands are enable level commands
and, by default, found in CONFIGURATION mode, also assign the launch command for CONFIGURATION
mode,
configure
, to the same privilege level as the
snmp-server
commands.
Line 1: The user john is assigned privilege level 8 and assigned a password.
Line 2: All other users are assigned a password to access privilege level 8.
Line 3: The
configure
command is assigned to privilege level 8 because it needs to reach
CONFIGURATION mode where the
snmp-server
commands are located.
Line 4: The
snmp-server
commands, in CONFIGURATION mode, are assigned to privilege level 8.
Dell(conf)# username john privilege 8 password john
Dell(conf)# enable password level 8 notjohn
Dell(conf)# privilege exec level 8 configure
Dell(conf)# privilege config level 8 snmp-server
Dell(conf)#end
Dell#show running-config
Current Configuration ...
!
hostname Force10
!
enable password level 8 notjohn
enable password Force10
864
Security