The default UP threshold is
254
. The routing state is UP if the scaled route metric is less than or equal
to the UP threshold.
The defult DOWN threshold is
255
. The routing state is DOWN if the scaled route metric is greater
than or equal to the DOWN threshold.
6.
(Optional) Display the tracking configuration.
EXEC Privilege mode
show track
object-id
7.
Example of the
track ip route metric threshold
Command
Example of the
track ipv6 route metric threshold
Command
Dell(conf)#track 6 ip route 2.1.1.0/24 metric threshold
Dell(conf-track-6)#delay down 20
Dell(conf-track-6)#delay up 20
Dell(conf-track-6)#description track ip route metric
Dell(conf-track-6)#threshold metric down 40
Dell(conf-track-6)#threshold metric up 40
Dell(conf-track-6)#exit
Dell(conf)#track 10 ip route 3.1.1.0/24 metric threshold
vrf vrf1
Dell(conf)#track 8 ipv6 route 2::/64 metric threshold
Dell(conf-track-8)#threshold metric up 30
Dell(conf-track-8)#threshold metric down 40
Displaying Tracked Objects
To display the currently configured objects used to track Layer 2 and Layer 3 interfaces, and IPv4 and
IPv6 routes, use the following
show
commands.
To display the configuration and status of currently tracked Layer 2 or Layer 3 interfaces, IPv4 or IPv6
routes, or a VRF instance, use the
show track
command. You can also display the currently configured
per-protocol resolution values used to scale route metrics when tracking metric thresholds.
• Display the configuration and status of currently tracked Layer 2 or Layer 3 interfaces, IPv4 or IPv6
routes, and a VRF instance.
show track [
object-id
[brief] | interface [brief] [vrf
vrf-name
] | ip route
[brief] [vrf
vrf-name
] | resolution | vrf
vrf-name
[brief] | brief]
• Use the
show running-config track
command to display the tracking configuration of a
specified object or all objects that are currently configured on the router.
show running-config track [
object-id
]
Example of Viewing the Configuration and Status of Tracked Layer 2/Layer 3 Interfaces
Dell#show track
Track 1
IP route 23.0.0.0/8 reachability
Reachability is Down (route not in route table)
2 changes, last change 00:16:08
Tracked by:
Track 2
Object Tracking
681
Summary of Contents for S4820T
