Dell S4820T, Configuration Manual

Page: 1127 / 1178

• (Optional) Display the configuration and the UP or DOWN state of tracked objects, including the client
(VRRP group) that is tracking an object’s state.
EXEC mode or EXEC Privilege mode
show track
• (Optional) Display the configuration and the UP or DOWN state of tracked interfaces and objects in
VRRP groups, including the time since the last change in an object’s state.
EXEC mode or EXEC Privilege mode
show vrrp
• (Optional) Display the configuration of tracked objects in VRRP groups on a specified interface.
EXEC mode or EXEC Privilege mode
show running-config interface interface
Examples of Configuring and Viewing the
track
Command
The following example shows how to configure tracking using the
track
command.
Dell(conf-if-te-1/1)#vrrp-group 111
Dell(conf-if-te-1/1-vrid-111)#track Tengigabitethernet 1/2
The following example shows how to verify tracking using the
show conf
command.
Dell(conf-if-te-1/1-vrid-111)#show conf
!
vrrp-group 111
advertise-interval 10
authentication-type simple 7 387a7f2df5969da4
no preempt
priority 255
track TenGigabitEthernet 1/2
virtual-address 10.10.10.1
virtual-address 10.10.10.2
virtual-address 10.10.10.3
virtual-address 10.10.10.10
The following example shows verifying the tracking status.
Dell#show track
Track 2
IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:16
Metric threshold down 255 up 254
First-hop interface is TenGigabitEthernet 1/3
Tracked by:
VRRP TenGigabitEthernet 1/8 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:16
First-hop interface is TenGigabitEthernet 1/3
Tracked by:
VRRP TenGigabitEthernet 1/8 IPv6 VRID 1
The following example shows verifying the VRRP status.
Dell#show vrrp
------------------
Virtual Router Redundancy Protocol (VRRP)
1127