Dell PowerEdge R510, Hardware Owner'S Manual

Page: 68 / 216

68
Using the System Setup Program and UEFI Boot Manager
Integrated Devices Screen
Hard-Disk Drive
Sequence Determines the order in which the BIOS attempts to
boot from hard drives in the system during system
startup.
USB Flash Drive
Emulation Type
(
Auto default)
Determines the emulation type for a USB flash drive.
Hard disk allows the USB flash drive to act as a hard
drive. Floppy allows the USB flash drive to act as a
removable diskette drive. Auto automatically chooses an
emulation type.
Boot Sequence Retry
(
Disabled default)
If this field is enabled and the system has failed to boot,
the system reattempts to boot after 30 seconds.
Option Description
Integrated SAS
Controller
(
Enabled default)
Enables or disables the integrated storage controller.
User Accessible USB
Ports
(
All Ports On default)
Enables or disables the user-accessible USB ports. Options
are
All Ports On , Only Back Ports On , and All Ports Off .
Internal USB Port 1
(
On default)
Enables or disables the internal USB port.
Internal USB Port 2
(
On default)
Enables or disables the internal USB port.
Embedded NIC1 and
NIC2
(
Enabled default)
Enables or disables the OS interface of the two embedded
NICs. (The NICs may also be accessed through the
system’s management controller.)
Embedded Gb NIC x
(NIC1 default: Enabled
with PXE ;
Other NICs: Enabled )
Enables or disables the embedded NICs. Options are
Enabled , Enabled with PXE , and Enabled with iSCSI
Boot . PXE support allows the system to boot from the
network.
MAC Address Displays the MAC address for the NIC.
Option Description
book.book Page 68 Friday, November 20, 2009 2:56 PM