Danfoss VLT 5000 Series, Instruction Manual, Page: 116 / 240

304 Terminal 27, input
(DIGITAL INPUT 27)
Value:
See parameter 300.
Function:
This parameter allows a choice between the different
options on terminal 27.
Functions are shown in the table at the beginning of
the section
Parameters - Inputs and Outputs .
Maximum frequency for terminal 27 is 5 kHz.
Description of choice:
See parameter 300.
305 Terminal 29, input
(DIGITAL INPUT 29)
Value:
See parameter 300.
Function:
This parameter allows a choice between the different
options on terminal 29. The functions are shown in the
table at the beginning of the section Parameters - In-
puts and Outputs .
Maximum frequency for terminal 29 is 65 kHz.
Description of choice:
See parameter 300.
306 Terminal 32, input
(DIGITAL INPUT 32)
Value:
See parameter 300.
Function:
This parameter allows a choice between the different
options on terminal 32. The functions are shown in the
table at the beginning of the section
Parameters - In-
puts and Outputs
.
Maximum frequency for terminal 32 is 65 kHz.
Description of choice:
See parameter 300.
307 Terminal 33, input
(DIGITAL INPUT 33)
Value:
See parameter 300.
Function:
This parameter allows a choice between the different
options on terminal 33. The functions are shown in the
table at the beginning of the section
Parameters - In-
puts and Outputs .
Maximum frequency for terminal 33 is 65 kHz.
Description of choice:
See parameter 300.
Analog inputs terminal no. 53(voltage) 54(voltage) 60(current)
parameter 308 311 314
Value:
No operation
(NO OPERATION) [0]
[0]
[0]
Reference (REFERENCE)
[1]
[1]
[1]
Feedback signal (FEEDBACK) [2] [2]
Torque limit (TORQUE LIMIT CTRL) [3] [2] [3]
Thermistor (THERMISTOR INPUT) [4] [3]
Relative reference (RELATIVE REFERENCE) [4] [4]
Max. torque frequency (MAX. TORQUE FREQ.) [5]
VLT
®
5000 Series
= factory setting, () = display text, [] = value for use in communication via serial communication port
MG.51.C5.22 - VLT
p
is a registered Danfoss trademark. 113
Progra
mming