D-Link 800 - DFL 800 - Security Appliance, User Manual

Page: 72 / 469

1. Go to Objects > Address Book > Add > IP address
2. Specify a suitable name for the IP Range, for example wwwservers.
3. Enter 192.168.10.16-192.168.10.21 as the IP Address
4. Click OK
Example 3.4. Deleting an Address Object
To delete an object named wwwsrv1 in the Address Book, do the following:
CLI
gw-world:/> delete Address IP4Address wwwsrv1
Web Interface
1. Go to Objects > Address Book
2. Select and right-click the address object wwwsrv1 in the grid
3. Choose Delete from the menu
4. Click OK
Deleting In-use IP Objects
If an IP object is deleted that is in use by another object then NetDefendOS will not allow the
configuration to be deployed and will produce a warning message. In other words, it will appear that
the object has been successfully deleted but NetDefendOS will not allow the configuration to be
saved to the D-Link Firewall.
3.1.3. Ethernet Addresses
Ethernet Address objects are used to define symbolic names for Ethernet addresses (also known as
MAC addresses). This is useful, for example, when populating the ARP table with static ARP
entries, or for other parts of the configuration where symbolic names are preferred over numerical
Ethernet addresses.
When specifying an Ethernet address the format aa-bb-cc-dd-ee-ff should be used. Ethernet
addresses are also displayed using this format.
Example 3.5. Adding an Ethernet Address
The following example adds an Ethernet Address object named wwwsrv1_mac with the numerical MAC address
08-a3-67-bc-2e-f2.
CLI
gw-world:/> add Address EthernetAddress wwwsrv1_mac Address=08-a3-67-bc-2e-f2
Web Interface
1. Go to Objects > Address Book > Add > Ethernet Address
3.1.3. Ethernet Addresses Chapter 3. Fundamentals
72