manualshive.com logo in svg

D-Link 800 - DFL 800 - Security Appliance, User Manual

The D-Link 800 - DFL 800 - Security Appliance is a top-of-the-line device designed to provide robust security and protection for your network. Equipped with advanced features and functionalities, this product guarantees utmost safety. Enhance your user experience by downloading the comprehensive User Manual for free from our website today.

Share
Download
background image

To make it possible to connect to this server from the Internet using the FTP ALG, the FTP ALG and rules should
be configured as follows:

Web Interface

A. Define the ALG:

1.

Go to Objects > ALG > Add > FTP ALG

2.

Enter Name: ftp-inbound

3.

Check Allow client to use active mode

4.

Uncheck Allow server to use passive mode

5.

Click OK

B. Define the Service:

1.

Go to Objects > Services > Add > TCP/UDP Service

2.

Enter the following:

•

Name: ftp-inbound

•

Type: select TCP from the list

•

Destination: 21 (the port the FTP server resides on)

•

ALG: select the "ftp-inbound" that has been created

3.

Click OK

C. Define a rule to allow connections to the public IP on port 21 and forward that to the internal FTP server:

1.

Go to Rules > IP Rules > Add > IPRule

2.

Now enter:

•

Name: SAT-ftp-inbound

6.2.3. The FTP ALG

Chapter 6. Security Mechanisms

203

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

EBLOCKER FAMILY User Manual preview
FAMILY
Brand: EBLOCKER Pages: 81
Authonet Firewall F-10 Product Overview & Operation Manual preview
Firewall F-10
Brand: Authonet Pages: 51
3Com 3CRWDR300A-73 User Manual preview
3CRWDR300A-73
Brand: 3Com Pages: 182
McAfee SG720 Quick Installation Manual preview
SG720
Brand: McAfee Pages: 32
Watchguard Firebox T70 Quick Start Manual preview
Firebox T70
Brand: Watchguard Pages: 37
SonicWALL TZ670 Quick Start Manual preview
TZ670
Brand: SonicWALL Pages: 2
SonicWALL TZ600 Quick Start Manual preview
TZ600
Brand: SonicWALL Pages: 2
MB Connect Line 5.100.200.02.00 Quick Start Up Manual preview
5.100.200.02.00
Brand: MB Connect Line Pages: 16
Caswell CAR-5040 Series User Manual preview
CAR-5040 Series
Brand: Caswell Pages: 134

Brands by name

Popular brands

Load more brands