D-Link 800 - DFL 800 - Security Appliance User Manual Download Page 162 | Manualshive

Page: 162 / 469

background image

4.6.3.2. IGMP Rules Configuration - Address Translation

The following examples illustrates the IGMP rules needed to configure IGMP according to the
Address Translation scenario described above in Section 4.6.2.2, “Multicast Forwarding - Address
Translation Scenario”. We need two IGMP report rules, one for each client interface. If1 uses no
address translation and if2 translates the multicast group to 237.192.10.0/24. We also need two
query rules, one for the translated address and interface, and one for the original address towards if1.

Two examples are provided, one for each pair of report and query rule. The upstream multicast
router uses IP UpstreamRouterIP.

Example 4.12. if1 Configuration

The following steps needs to be executed to create the report and query rule pair for if1 which uses no address
translation.

Web Interface

A. Create the first IGMP Rule:

1.

Go to Routing > IGMP > IGMP Rules > Add > IGMP Rule

2.

Under General enter:

•

Name: A suitable name for the rule, for example Reports_if1

•

Type: Report

•

Action: Proxy

•

Output: wan (this is the relay interface)

3.

Under Address Filter enter:

•

Source Interface: if1

•

Source Network: if1net

•

Destination Interface: core

•

Destination Network: auto

•

Multicast Source: 192.168.10.1

•

Multicast Group: 239.192.10.0/24

4.

Click OK

B. Create the second IGMP Rule:

1.

Again go to Routing > IGMP > IGMP Rules > Add > IGMP Rule

2.

Under General enter:

•

Name: A suitable name for the rule, for example Queries_if1

•

Type: Query

•

Action: Proxy

•

Output: if1 (this is the relay interface)

3.

Under Address Filter enter:

•

Source Interface: wan

•

Source Network: UpstreamRouterIp

•

Destination Interface: core

•

Destination Network: auto

4.6.3. IGMP Configuration

Chapter 4. Routing

162

«
...
160
161
162
163
164
...
»

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

Proventia Network GX4004

Brand: IBM Pages: 3

Brand: IBASE Technology Pages: 69

Brand: Black Box Pages: 3

FireWire 3-Port CardBus

Brand: SIIG Pages: 8

DP FireWire 800 PCI-32T

Brand: SIIG Pages: 12

Brand: Sophos Pages: 2

Brand: Sophos Pages: 4

Brand: Sophos Pages: 2

Brand: Sophos Pages: 8

Brand: Sophos Pages: 9

Brand: Sophos Pages: 15

Brand: Sophos Pages: 14

Brand: Sophos Pages: 28

Brand: Sophos Pages: 32

Brand: Sophos Pages: 65

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands