D-Link 800 - DFL 800 - Security Appliance User Manual Download Page 199 | Manualshive

Page: 199 / 469

background image

Additional filetypes not included by default can be added to the Allow/Block list however
these cannot be subject to content checking meaning that the file extension will be trusted
as being correct for the contents of the file.

Note

The Verify MIME type and Allow/Block Selected Types options work in the
same way for the FTP, POP3 and SMTP ALGs.

•

Download File Size Limit - A file size limit can additionally be specified for any single
download (this option is available only for HTTP and SMTP ALG downloads).

The Ordering for HTTP Filtering

HTTP filtering obeys the following processing order and is similar to the order followed by the
SMTP ALG:

1.

Whitelist.

2.

Blacklist.

3.

Web content filtering (if enabled).

4.

Anti-virus scanning (if enabled).

As described above, if a URL is found on the whitelist then it will not be blocked if it also found on
the blacklist. If it is enabled, Anti-virus scanning is always applied, even though a URL is
whitelisted. If it is enabled, Web content filtering is still applied to whitelisted URLs but if instead
of blocking, flagged URLs are only logged. If it is enabled, Anti-virus scanning is always applied,
even though a URL is whitelisted.

Figure 6.2. HTTP ALG Processing Order

Using Wildcards in White and Blacklists

6.2.2. The HTTP ALG

Chapter 6. Security Mechanisms

199

«
...
197
198
199
200
201
...
»

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

Brand: PaloAlto Networks Pages: 40

Brand: Authonet Pages: 51

Brand: Atlante Informatica Pages: 4

FortiBridge 1000

Brand: Fortinet Pages: 286

Brand: EVOC Pages: 33

Brand: Smoothwall Pages: 17

Brand: Symantec Pages: 41

10521146 - Network Security 7120

Brand: Symantec Pages: 392

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands