manualshive.com logo in svg

D-Link 800 - DFL 800 - Security Appliance, User Manual, Page: 66 / 469

Share
Download
D-Link 800 - DFL 800 - Security Appliance User Manual Download Page 66

snapshot of the state on November 21st, 2008.

To restore a backup file, the administrator should upload the file to the D-Link Firewall. The name
of the file does not need to be changed in any way and can retain the date since NetDefendOS will
read a header in the file to determine what it is.

Backup and Restore using the WebUI

As an alternative to using SCP, the administrator can initiate a backup or restore of the configuration
or complete system directly through the WebUI. The example below illustrates how this is done.

Example 2.15. Backing up the Entire System

In this example we will backup the entire system on 12 December 2008.

Web Interface

1.

Go to Maintenance > Backup

2.

The Backup dialog will be shown

3.

Press the Backup configuration button

4.

A file dialog is shown - choose a directory for the created file

5.

Download of the backup file will then start

Note: Backups do not contain everything

Backups include only static information from the NetDefendOS configuration.
Dynamic information such as the DHCP server lease database or Anti-Virus/IDP
databases will not be backed up.

2.6.3. Configuration Backup and Restore

The NetDefendOS configuration of a D-Link Firewall at any given point of time can be backed up
or restored on demand. Configurations are downloaded through the WebUI to a single file which is
saved on the local management workstation. This file can then be uploaded at any time restore that
configuration.

By default, backup files have the filetype .pkg and the file name is of the form config-yyyymmdd.pkg
where "yyyymmdd" represents the date of the backup. A backup created on December 21st, 2008
would therefore be called config-20081221.pkg.

Backups can be created at any time without disturbing NetDefendOS operation. After restoring a
backup it is necessary to perform an Activate to make the configuration active. This activation
should, in most cases, not disturb system operation.

Example 2.16. Configuration Backup and Restore

Web Interface

To create a backup of the currently running configuration:

1.

Go to Tools > Backup

2.

Download configuration, select a file name and begin the backup

To restore a configuration backup:

2.6.3. Configuration Backup and
Restore

Chapter 2. Management and Maintenance

66

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments