D-Link 800 - DFL 800 - Security Appliance User Manual Download Page 157 | Manualshive

Page: 157 / 469

background image

Example 4.9. Forwarding of Multicast Traffic using the SAT Multiplex Rule

In this example, we will create a multiplex rule in order to forward the multicast groups 239.192.10.0/24:1234 to
the interfaces if1, if2 and if3. All groups have the same sender 192.168.10.1 which is located somewhere behind
the wan interface. The multicast groups should only be forwarded to the out interfaces if clients behind those
interfaces have requested the groups using IGMP. The following steps need to be executed to configure the
actual forwarding of the multicast traffic. IGMP has to be configured separately.

Web Interface

A. Create a custom service for multicast called multicast_service:

1.

Go to Objects > Services > Add > TCP/UDP

2.

Now enter:

•

Name: multicast_service

•

Type: UDP

•

Destination: 1234

B. Create an IP rule:

1.

Go to Rules > IP Rules > Add > IP Rule

2.

Under General enter.

•

Name: a name for the rule, for example Multicast_Multiplex

•

Action: Multiplex SAT

•

Service: multicast_service

3.

Under Address Filter enter:

•

Source Interface: wan

•

Source Network: 192.168.10.1

•

Destination Interface: core

•

Destination Network: 239.192.10.0/24

4.

Click the Multiplex SAT tab and add the output interfaces if1, if2 and if3 one at a time. For each interface,
leave the IPAddress field blank since no destination address translation is wanted.

5.

Make sure the forwarded using IGMP checkbox is set

6.

Click OK

Creating Multiplex Rules with the CLI

Creating multiplex rules through the CLI requires some additional explanation.

First, the IPRuleset, in this example main, needs to be selected as the current category:

gw-world:/> cc IPRuleset main

The CLI command to create the multiplex rule is then:

add IPRule SourceNetwork=<srcnet> SourceInterface=<srcif>

DestinationInterface=<srcif> DestinationNetwork=<destnet>
Action=MultiplexSAT Service=<service>
MultiplexArgument={outif1;ip1},{outif2;ip2},{outif3;ip3}...

4.6.2. Multicast Forwarding using the
SAT Multiplex Rule

Chapter 4. Routing

157

«
...
155
156
157
158
159
...
»

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

Brand: PaloAlto Networks Pages: 2

SageGlass 300-1194-001

Brand: SAINT-GOBAIN Pages: 2

Brand: Arista Pages: 34

Brand: Watchguard Pages: 2

Brand: H3C Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands