manualshive.com logo in svg

D-Link 800 - DFL 800 - Security Appliance, User Manual

The D-Link 800 - DFL 800 - Security Appliance is a top-of-the-line device designed to provide robust security and protection for your network. Equipped with advanced features and functionalities, this product guarantees utmost safety. Enhance your user experience by downloading the comprehensive User Manual for free from our website today.

Share
Download
background image

RADIUS with NetDefendOS

NetDefendOS acts as a RADIUS client, sending user credentials and connection parameter
information as a RADIUS message to a nominated RADIUS server. The server processes the
requests and sends back a RADIUS message to accept or deny them. One or more external servers
can be defined in NetDefendOS.

RADIUS Security

To provide security, a common shared secret is configured on both the RADIUS client and the
server. This secret enables encryption of the messages sent from the RADIUS client to the server
and is commonly configured as a relatively long text string. The string can contain up to 100
characters and is case sensitive.

RADIUS uses PPP to transfer username/password requests between client and RADIUS server, as
well as using PPP authentication schemes such as PAP and CHAP. RADIUS messages are sent as
UDP messages via UDP port 1812.

8.2.4. External LDAP Servers

Lightweight Directory Access Protocol (LDAP) servers can also be used with NetDefendOS as an
authentication source. This is implemented by the D-Link Firewall acting as a client to one or more
LDAP servers. Multiple servers can be configured to provide redundancy if any servers become
unreachable.

Setting Up LDAP Authentication

There are two steps to setting up user authentication with LDAP servers:

A. Define one or more user authentication LDAP server objects in NetDefendOS.

B. Specify a list of these LDAP server objects in a user authentication rule.

These two steps are described below.

A. Defining User Authentication LDAP Servers

One or more named LDAP server objects can be defined in NetDefendOS. These objects tell
NetDefendOS which LDAP servers are available and how to access them.

The following general parameters are used for configuration of each server:

•

Name

The name given to the server object for display purposes in NetDefendOS.

•

IP Address

The IP address of the LDAP server.

•

Port

The port number on the LDAP server which will receive the client request which is sent using
TCP/IP. This port is by default 389.

•

Timeout

This is the timeout length of time for user authentication attempts in seconds. If no response to a
request is received from the server after this time then the server will be considered to be

8.2.4. External LDAP Servers

Chapter 8. User Authentication

305

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

D-Link NetDefend DFL-260E Log Reference Manual preview
NetDefend DFL-260E
Brand: D-Link Pages: 652
D-Link NetDefend DFL-CP310 User Manual preview
NetDefend DFL-CP310
Brand: D-Link Pages: 485
ZyXEL Communications ZyXEL Prestige 310 User Manual preview
ZyXEL Prestige 310
Brand: ZyXEL Communications Pages: 199
Cisco Catalyst 3130 Software Configuration Manual preview
Catalyst 3130
Brand: Cisco Pages: 1354
Cisco Catalyst 3120 Software Manual preview
Catalyst 3120
Brand: Cisco Pages: 1224
Fortinet FortiWiFi 60D Installation Instructions Manual preview
FortiWiFi 60D
Brand: Fortinet Pages: 2
Fortinet FortiWiFi 80F Series Quick Start Manual preview
FortiWiFi 80F Series
Brand: Fortinet Pages: 9
Fortinet FortiWeb 100E Quick Start Manual preview
FortiWeb 100E
Brand: Fortinet Pages: 9
Fortinet FSM-500F Configuration Manual preview
FSM-500F
Brand: Fortinet Pages: 19
Fortinet FortiTester 4000E Quick Start Manual preview
FortiTester 4000E
Brand: Fortinet Pages: 20
Fortinet FortiWiFi 60 Installation And Configuration Manual preview
FortiWiFi 60
Brand: Fortinet Pages: 76
Fortinet Fortiwifi fortiwifi-60 Administration Manual preview
Fortiwifi fortiwifi-60
Brand: Fortinet Pages: 394
AhnLab TrusGuard Installation Manual preview
TrusGuard
Brand: AhnLab Pages: 120
AlphaShield 202-5731 User Manual preview
202-5731
Brand: AlphaShield Pages: 12

Brands by name

Popular brands

Load more brands