manualshive.com logo in svg

D-Link 800 - DFL 800 - Security Appliance, User Manual

The D-Link 800 - DFL 800 - Security Appliance is a top-of-the-line device designed to provide robust security and protection for your network. Equipped with advanced features and functionalities, this product guarantees utmost safety. Enhance your user experience by downloading the comprehensive User Manual for free from our website today.

Share
Download
background image

Example 4.15. Setting up Transparent Mode for Scenario 2

Configure a Switch Route over the LAN and DMZ interfaces for address range 10.0.0.0/24 (assume the WAN
interface is already configured).

Web Interface

Configure the interfaces:

1.

Go to Interfaces > Ethernet > Edit (lan)

2.

Now enter:

•

IP Address: 10.0.0.1

•

Network: 10.0.0.0/24

•

Transparent Mode: Disable

•

Add route for interface network: Disable

3.

Click OK

4.

Go to Interfaces > Ethernet > Edit (dmz)

5.

Now enter:

•

IP Address: 10.0.0.2

•

Network: 10.0.0.0/24

•

Transparent Mode: Disable

•

Add route for interface network: Disable

6.

Click OK

Configure the interface groups:

1.

Go to Interfaces > Interface Groups > Add > InterfaceGroup

2.

Now enter:

•

Name: TransparentGroup

•

Security/Transport Equivalent: Disable

4.7.3. Transparent Mode Scenarios

Chapter 4. Routing

175

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

H3C SecPath F100-C-A-W Installation Manual preview
SecPath F100-C-A-W
Brand: H3C Pages: 46
H3C SecPath F50X0-D Series Command Reference Manual preview
SecPath F50X0-D Series
Brand: H3C Pages: 39
HotBrick VPN 800 User Manual preview
VPN 800
Brand: HotBrick Pages: 89
Atlante Informatica AFEL Series User Manual preview
AFEL Series
Brand: Atlante Informatica Pages: 4
IBM 1G User Manual preview
1G
Brand: IBM Pages: 52
Fortinet FortiGate 500 Installation And Configuration Manual preview
FortiGate 500
Brand: Fortinet Pages: 276
Watchguard Firebox T30 Quick Start Manual preview
Firebox T30
Brand: Watchguard Pages: 41
D-Link NetDefend Firewall Series Manual preview
NetDefend Firewall Series
Brand: D-Link Pages: 9
Dell NSA E8500 Getting Started Manual preview
NSA E8500
Brand: Dell Pages: 74
Dell SonicWALL NSA 6600 Getting Started Manual preview
SonicWALL NSA 6600
Brand: Dell Pages: 57
Dell SonicWALL Administration Manual preview
SonicWALL
Brand: Dell Pages: 49
Dell SonicWALL GX250 Manual preview
SonicWALL GX250
Brand: Dell Pages: 200
Nexcom DNA 130-E User Manual preview
DNA 130-E
Brand: Nexcom Pages: 53
Kontron KBox N-110 Series Quick Installation Manual preview
KBox N-110 Series
Brand: Kontron Pages: 2
Infoblox Infoblox-1852-A Installation Manual preview
Infoblox-1852-A
Brand: Infoblox Pages: 20
Infoblox Infoblox-1050-A Installation Manual preview
Infoblox-1050-A
Brand: Infoblox Pages: 28
Infoblox Infoblox-550 User Manual preview
Infoblox-550
Brand: Infoblox Pages: 40

Brands by name

Popular brands

Load more brands