manualshive.com logo in svg

D-Link 800 - DFL 800 - Security Appliance, User Manual

The D-Link 800 - DFL 800 - Security Appliance is a top-of-the-line device designed to provide robust security and protection for your network. Equipped with advanced features and functionalities, this product guarantees utmost safety. Enhance your user experience by downloading the comprehensive User Manual for free from our website today.

Share
Download
background image

Example 4.11. IGMP - No Address Translation

The following example requires a configured interface group IfGrpClients including interfaces if1, if2 and if3. The
ip address of the upstream IGMP router is known as UpstreamRouterIP.

Two rules are needed. The first one is a report rule that allows the clients behind interfaces if1, if2 and if3 to
subscribe for the multicast groups 239.192.10.0/24. The second rule, is a query rule that allows the upstream
router to query us for the multicast groups that the clients have requested.

The following steps need to be executed to create the two rules.

Web Interface

A. Create the first IGMP Rule:

1.

Go to Routing > IGMP > IGMP Rules > Add > IGMP Rule

2.

Under General enter:

•

Name: A suitable name for the rule, for example Reports

•

Type: Report

•

Action: Proxy

•

Output: wan (this is the relay interface)

3.

Under Address Filter enter:

•

Source Interface: lfGrpClients

•

Source Network: if1net, if2net, if3net

•

Destination Interface: core

•

Destination Network: auto

•

Multicast Source: 192.168.10.1

•

Multicast Group: 239.192.10.0/24

4.

Click OK

B. Create the second IGMP Rule:

1.

Again go to Routing > IGMP > IGMP Rules > Add > IGMP Rule

2.

Under General enter:

•

Name: A suitable name for the rule, for example Queries

•

Type: Query

•

Action: Proxy

•

Output: IfGrpClients (this is the relay interface)

3.

Under Address Filter enter:

•

Source Interface: wan

•

Source Network: UpstreamRouterIp

•

Destination Interface: core

•

Destination Network: auto

•

Multicast Source: 192.168.10.1

•

Multicast Group: 239.192.10.0/24

4.

Click OK

4.6.3. IGMP Configuration

Chapter 4. Routing

161

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

Draytek VigorPro 5510 Series User Manual preview
VigorPro 5510 Series
Brand: Draytek Pages: 316
Source fire Sourcefire 3D System Installation Manual preview
Sourcefire 3D System
Brand: Source fire Pages: 280
D-Link NetDefend DFL-800 Quick Manual / User Manual preview
NetDefend DFL-800
Brand: D-Link Pages: 4
M86 Security MSA Installation Manual preview
MSA
Brand: M86 Security Pages: 118
Nexcom NSA 7145 User Manual preview
NSA 7145
Brand: Nexcom Pages: 94
Hillstone SG-6000-G2110 Installation Manual preview
SG-6000-G2110
Brand: Hillstone Pages: 50
Belkin F5U501N (Dutch) Manual preview
F5U501N
Brand: Belkin Pages: 17
IOGear GFH310 User Manual preview
GFH310
Brand: IOGear Pages: 1

Brands by name

Popular brands

Load more brands