manualshive.com logo in svg

D-Link 800 - DFL 800 - Security Appliance, User Manual, Page: 350 / 469

Share
Download
D-Link 800 - DFL 800 - Security Appliance User Manual Download Page 350

3.

Select the X.509 Certificate option

4.

Click OK

B. Create Identification Lists:

1.

Go to Objects > VPN Objects > ID List > Add > ID List

2.

Enter a descriptive name, for example sales

3.

Click OK

4.

Go to Objects > VPN Objects > ID List > Sales > Add > ID

5.

Enter the name for the client

6.

Select Email as Type

7.

In the Email address field, enter the email address selected when you created the certificate on the client

8.

Create a new ID for every client that you want to grant access rights according to the instructions above

C. Configure the IPsec tunnel:

1.

Go to Interfaces > IPsec > Add > IPsec Tunnel

2.

Now enter:

•

Name: RoamingIPsecTunnel

•

Local Network: 10.0.1.0/24 (This is the local network that the roaming users will connect to)

•

Remote Network: all-nets

•

Remote Endpoint: (None)

•

Encapsulation Mode: Tunnel

3.

For Algorithms enter:

•

IKE Algorithms: Medium or High

•

IPsec Algorithms: Medium or High

4.

For Authentication enter:

•

Choose X.509 Certificates as the authentication method

•

Root Certificate(s): Select your CA server root certificate imported earlier and add it to the Selected list

•

Gateway Certificate: Choose your newly created firewall certificate

•

Identification List: Select your ID List that you want to associate with your VPN Tunnel. In our case that
will be sales

5.

Under the Routing tab:

•

Enable the option: Dynamically add route to the remote network when a tunnel is established

6.

Click OK

D. Finally configure the IP rule set to allow traffic inside the tunnel.

9.4.3.4. Using Config Mode

IKE Configuration Mode (Config Mode) is an extension to IKE that allows NetDefendOS to
provide LAN configuration information to remote VPN clients. It is used to dynamically configure
IPsec clients with IP addresses and corresponding netmasks, and to exchange other types of
information associated with DHCP. The IP address provided to a client can be either be based on a
range of predefined static IP addresses defined for Config Mode or it can come from DHCP servers
associated with an IP Pool object.

9.4.3. Roaming Clients

Chapter 9. VPN

350

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments