D-Link 800 - DFL 800 - Security Appliance User Manual Download Page 105 | Manualshive

Page: 105 / 469

background image

The exception to this bi-directional flow is FwdFast rules. If the FwdFast action is used, the rule
will not allow traffic to flow from the destination back to the source. If bi-directional flow is
required then two FwdFast rules are needed, one for either direction. This is also the case if a
FwdFast rule is used with a SAT rule.

Using Reject

In certain situations the Reject action is recommended instead of the Drop action because a polite
reply is required from NetDefendOS. An example of such a situation is when responding to the
IDENT user identification protocol.

3.5.4. Editing IP rule set Entries

After adding various rules to the rule set editing any line can be achieved in the Web-UI by right
clicking on that line.

A context menu will appear with the following options:

Edit

This allows the contents of the rule to be changed.

Delete

This will remove the rule permanently from the rule set.

Disable/Enable

This allows the rule to be disabled but left in the rule set. While disabled the
rule set line will not affect traffic flow and will appear grayed out in the user
interface. It can be re-enabled at any time.

Move options

The last section of the context menu allows the rule to be moved to a
different position in the rule set and therefore have a different precedence

3.5.5. IP Rule Set Folders

In order to help organise large numbers of entries in IP rule sets, it is possible to create IP rule set
folders. These folders are just like a folder in a computer's file system. They are created with a given
name and can then be used to contain all the IP rules that are related together as a group.

Using folders is simply a way for the administrator to conveniently divide up IP rule set entries and
no special properties are given to entries in different folders. NetDefendOS continues to see all
entries as though they were in a single set of IP rules.

The folder concept is also used by NetDefendOS in the Address Book, where related IP address
objects can be grouped together in administrator created folders.

Example 3.17. Adding an Allow IP Rule

This example shows how to create a simple Allow rule that will allow HTTP connections to opened from the lannet
network on the lan interface to any network (all-nets) on the wan interface.

CLI

First, change the current category to be the main IP rule set:

gw-world:/> cc IPRuleSet main

Now, create the IP rule:

gw-world:/main> add IPRule Action=Allow Service=http SourceInterface=lan

SourceNetwork=lannet DestinationInterface=wan
DestinationNetwork=all-nets Name=lan_http

3.5.4. Editing IP rule set Entries

Chapter 3. Fundamentals

105

«
...
103
104
105
106
107
...
»

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

SageGlass 300-1194-001

Brand: SAINT-GOBAIN Pages: 2

Brand: IBASE Technology Pages: 33

Brand: Lanner Pages: 84

Brand: Cisco Pages: 6

Brand: Cisco Pages: 2

Brand: Cisco Pages: 7

Brand: Cisco Pages: 222

Brand: Hillstone Pages: 50

Brand: Watchguard Pages: 20

Brand: Nlynx Pages: 75

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands