D-Link 800 - DFL 800 - Security Appliance User Manual Download Page 65 | Manualshive

Page: 65 / 469

background image

2.6. Maintenance

2.6.1. Auto-Update Mechanism

A number of the NetDefendOS security features rely on external servers for automatic updates and
content filtering. The Intrusion Prevention and Detection system and Anti-Virus modules require
access to updated signature databases in order to provide protection against the latest threats.

To facilitate the Auto-Update feature D-Link maintains a global infrastructure of servers providing
update services for D-Link Firewalls. To ensure availability and low response times, NetDefendOS
employs a mechanism for automatically selecting the most appropriate server to supply updates.

For more details on these features see the following sections:

•

Section 6.5, “Intrusion Detection and Prevention”

•

Section 6.4, “Anti-Virus Scanning”

•

Section 6.3, “Web Content Filtering”

2.6.2. Creating Backup Files

The administrator has the ability to take a snapshot of a NetDefendOS system at a given point in
time and restore it when necessary. The snapshot can be of two types:

•

A configuration backup which does not include the installed NetDefendOS version. This is
useful if the NetDefendOS version does not change.

•

A system backup which is a complete backup of both the configuration and the installed
NetDefendOS software. This is useful if both the configuration is to be changed and the
NetDefendOS version upgraded.

Backup files can be created both by downloading the files directly from the D-Link Firewall using
SCP (Secure Copy) or alternatively using the WebUI. It cannot be done though the CLI.

Operation Interruption

Backups can be created at any time without disturbing NetDefendOS operation. After restoring a
backup it is necessary to perform an Activate to make the restored configuration/system active.

Restoring and activating a configuration-only backup should not, in most cases, disturb system
operation. Complete system restore, however, is more involved and will require that NetDefendOS
reinitializes, with the loss of all existing connections. Initialization may require some seconds to
complete depending on the hardware type and normal operation will not be possible during this
time.

Backup and Restore using SCP

There are two files located in the NetDefendOS root directory:

•

config.bak - This is the backup of the current configuration.

•

full.bak - This is the backup of the complete system.

SCP can be used to download either of these files. When the download is complete the filename will
be altered to include the date. For example, full.bak might become full-20081121.bak to show it is a

2.6. Maintenance

Chapter 2. Management and Maintenance

65

«
...
63
64
65
66
67
...
»

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

FortiBridge-1000

Brand: Fortinet Pages: 2

Proventia Management SiteProtector SP2001

Brand: IBM Pages: 57

Brand: Aaeon Pages: 82

Brand: Juniper Pages: 13

PR 2080TI/12 4U

Brand: DECRYPTUM Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands