manualshive.com logo in svg

D-Link 800 - DFL 800 - Security Appliance, User Manual

The D-Link 800 - DFL 800 - Security Appliance is a top-of-the-line device designed to provide robust security and protection for your network. Equipped with advanced features and functionalities, this product guarantees utmost safety. Enhance your user experience by downloading the comprehensive User Manual for free from our website today.

Share
Download
background image

•

Idle Timeout - The time of inactivity in seconds to wait before disconnection.

Using the PPTP Client Feature

One usage of the PPTP client feature is shown in the scenario depicted below.

Here a number of clients are being NATed through NetDefendOS before being connected to a PPTP
server on the other side of the D-Link Firewall. If more that one of the clients is acting as a PPTP
client which is trying to connect to the PPTP server then this will not work because of the NATing.

The only way of achieving multiple PPTP clients being NATed like this, is for the D-Link Firewall
to act as a PPTP client when it connects to the PPTP server. To summarize the setup:

•

A PPTP tunnel is defined between NetDefendOS and the server.

•

A route is added to the routing table in NetDefendOS which specifies that traffic for the server
should be routed through the PPTP tunnel.

Figure 9.3. PPTP Client Usage

9.5.4. PPTP/L2TP Clients

Chapter 9. VPN

370

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

D-Link NetDefend DFL-800 Quick Manual preview
NetDefend DFL-800
Brand: D-Link Pages: 21
McAfee NS7100 Quick Start Manual preview
NS7100
Brand: McAfee Pages: 16
H3C SecPath NSQM1F1KGM0 Manual preview
SecPath NSQM1F1KGM0
Brand: H3C Pages: 17
Aaeon ICS-6270 User Manual preview
ICS-6270
Brand: Aaeon Pages: 104
NETGEAR ProSafe FVS318v3 Reference Manual preview
ProSafe FVS318v3
Brand: NETGEAR Pages: 20
Fortinet FortiGate-110C Quick Start Manual preview
FortiGate-110C
Brand: Fortinet Pages: 2
PYCH Clone+ User Manual preview
Clone+
Brand: PYCH Pages: 17
SonicWALL TZ 170 Getting Started Manual preview
TZ 170
Brand: SonicWALL Pages: 30
IBM QRadar XGS 5200 Replacement Instructions Manual preview
QRadar XGS 5200
Brand: IBM Pages: 8
Futurex USB Backup HSM User Manual preview
USB Backup HSM
Brand: Futurex Pages: 31
AXIOMTEK NA342 User Manual preview
NA342
Brand: AXIOMTEK Pages: 52
AXIOMTEK NA-330 Series User Manual preview
NA-330 Series
Brand: AXIOMTEK Pages: 60
AXIOMTEK NA-401 Hardware Installation Manual preview
NA-401
Brand: AXIOMTEK Pages: 68
Netgate XG-7100-1U Manual preview
XG-7100-1U
Brand: Netgate Pages: 83

Brands by name

Popular brands

Load more brands