manualshive.com logo in svg

D-Link 800 - DFL 800 - Security Appliance, User Manual

The D-Link 800 - DFL 800 - Security Appliance is a top-of-the-line device designed to provide robust security and protection for your network. Equipped with advanced features and functionalities, this product guarantees utmost safety. Enhance your user experience by downloading the comprehensive User Manual for free from our website today.

Share
Download
background image

DST End Date

What month and day DST ends, in the format MM-DD.

Default: none

Time Sync Server Type

Type of server for time synchronization, UDPTime or SNTP (Simple Network Time Protocol).

Default: SNTP

Primary Time Server

DNS hostname or IP Address of Timeserver 1.

Default: None

Secondary Time Server

DNS hostname or IP Address of Timeserver 2.

Default: None

teriary Time Server

DNS hostname or IP Address of Timeserver 3.

Default: None

Interval between synchronization

Seconds between each resynchronization.

Default: 86400

Max time drift

Maximum time drift in seconds that a server is allowed to adjust.

Default: 600

Group interval

Interval according to which server responses will be grouped.

Default: 10

3.8.4. Settings Summary for Date and
Time

Chapter 3. Fundamentals

118

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

Watchguard Firebox T45 Quick Start Manual preview
Firebox T45
Brand: Watchguard Pages: 2
NETGEAR FWG114P - ProSafe 802.11g Wireless Firewall Reference Manual preview
FWG114P - ProSafe 802.11g Wireless Firewall
Brand: NETGEAR Pages: 70
Barracuda NG Firewall F18 Manual preview
NG Firewall F18
Brand: Barracuda Pages: 5
SonicWALL TZ500 Quick Start Manual preview
TZ500
Brand: SonicWALL Pages: 2
Caswell CAR-5040 Series User Manual preview
CAR-5040 Series
Brand: Caswell Pages: 134
BESTEK NSP-10H6 User Manual preview
NSP-10H6
Brand: BESTEK Pages: 41
Fortinet FortiGate 2600F Series Quick Start Manual preview
FortiGate 2600F Series
Brand: Fortinet Pages: 13
H3C F1000-AI-20 Manual preview
F1000-AI-20
Brand: H3C Pages: 44

Brands by name

Popular brands

Load more brands