D-Link 800 - DFL 800 - Security Appliance, User Manual

Page: 262 / 469

compressed file attachment might need to be uncompressed into a much larger file which can place
an excessive load on NetDefendOS resources and noticeably slowdown throughput.
To prevent this situation, the administrator should specify a Compression Ratio limit. If the limit of
the ration is specified as 10 then this will mean that if the uncompressed file is 10 times larger than
the compressed file, the specified Action should be taken. The Action can be one of:
• Allow - The file is allowed through without virus scanning
• Scan - Scan the file for viruses as normal
• Drop - Drop the file
In all three of the above cases the event is logged.
Verifying the MIME Type
The ALG File Integrity options can be utilized with Anti-Virus scanning to check that the file's
contents matches the MIME type it claims to be.
The MIME type identifies a file's type. For instance a file might be identified as being of type .gif
and therefore should contain image data of that type. Some viruses can try to hide inside files by
using a misleading file type. A file might pretend to be a .gif file but the file's data will not match
that type's data pattern because it is infected with a virus.
Enabling of this function is recommended to make sure this form of attack cannot allow a virus to
get through. The possible MIME types that can be checked are listed in Appendix C, Verified MIME
filetypes.
Setting the Correct System Time
It is important that a NetDefendOS has the correct system time set if the auto-update feature in the
Anti-Virus module can function correctly. An incorrect time can mean the auto-updating is disabled.
The console command
> updatecenter -status
will show the current status of the auto-update feature. This can also be done through the WebUI.
Updating in High Availability Clusters
Updating the Anti-Virus databases for both the D-Link Firewalls in an HA Cluster is performed
automatically by NetDefendOS. In a cluster there is always an active unit and an inactive unit. Only
the active unit in the cluster will perform regular checking for new database updates. If a new
database update becomes available the sequence of events will be as follows:
1. The active unit determines there is a new update and downloads the required files for the
update.
2. The active unit performs an automatic reconfiguration to update its database.
3. This reconfiguration causes a failover so the passive unit becomes the active unit.
4. When the update is completed, the newly active unit also downloads the files for the update
and performs a reconfiguration.
5. This second reconfiguration causes another failover so the passive unit reverts back to being
active again.
These steps result in both D-Link Firewalls in a cluster having updated databases and with the
6.4.6. Anti-Virus Options Chapter 6. Security Mechanisms
262