manualshive.com logo in svg

D-Link 800 - DFL 800 - Security Appliance, User Manual

The D-Link 800 - DFL 800 - Security Appliance is a top-of-the-line device designed to provide robust security and protection for your network. Equipped with advanced features and functionalities, this product guarantees utmost safety. Enhance your user experience by downloading the comprehensive User Manual for free from our website today.

Share
Download
background image

•

Multicast Source: 192.168.10.1

•

Multicast Group: 239.192.10.0/24

4.

Click OK

Example 4.13. if2 Configuration - Group Translation

The following steps needs to be executed to create the report and query rule pair for if2 which translates the
multicast group. Note that the group translated therefore the IGMP reports include the translated IP addresses
and the queries will contain the original IP addresses

Web Interface

A. Create the first IGMP Rule:

1.

Go to Routing > IGMP > IGMP Rules > Add > IGMP Rule

2.

Under General enter:

•

Name: A suitable name for the rule, for example Reports_if2

•

Type: Report

•

Action: Proxy

•

Output: wan (this is the relay interface)

3.

Under Address Filter enter:

•

Source Interface: if2

•

Source Network: if2net

•

Destination Interface: core

•

Destination Network: auto

•

Multicast Source: 192.168.10.1

•

Multicast Group: 239.192.10.0/24

4.

Click OK

B. Create the second IGMP Rule:

1.

Again go to Routing > IGMP > IGMP Rules > Add > IGMP Rule

2.

Under General enter:

•

Name: A suitable name for the rule, for example Queries_if2

•

Type: Query

•

Action: Proxy

•

Output: if2 (this is the relay interface)

3.

Under Address Filter enter:

•

Source Interface: wan

•

Source Network: UpstreamRouterIp

•

Destination Interface: core

•

Destination Network: auto

•

Multicast Source: 192.168.10.1

4.6.3. IGMP Configuration

Chapter 4. Routing

163

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

Trend Micro TippingPoint NX-Platform Hardware Installation And Safety preview
TippingPoint NX-Platform
Brand: Trend Micro Pages: 65
Trusted Systems SafeGuard Quick Start Manual preview
SafeGuard
Brand: Trusted Systems Pages: 3
Aaeon FWS-2271 User Manual preview
FWS-2271
Brand: Aaeon Pages: 100
Sophos XGS 116 Quick Start Manual preview
XGS 116
Brand: Sophos Pages: 68
Barracuda CloudGen Firewall F1000 CE0 Quick Start Manual preview
CloudGen Firewall F1000 CE0
Brand: Barracuda Pages: 8
Watchguard Firebox M4600 Hardware Manual preview
Firebox M4600
Brand: Watchguard Pages: 34
Infoblox Infoblox-1852-A Installation Manual preview
Infoblox-1852-A
Brand: Infoblox Pages: 20
Infoblox Infoblox-1050-A Installation Manual preview
Infoblox-1050-A
Brand: Infoblox Pages: 28
Infoblox Infoblox-550 User Manual preview
Infoblox-550
Brand: Infoblox Pages: 40

Brands by name

Popular brands

Load more brands