D-Link 800 - DFL 800 - Security Appliance, User Manual, Page: 61 / 469

Share

Page: 61 / 469

D-Link 800 - DFL 800 - Security Appliance User Manual Download Page 61

Default: Enabled

SNMP Request Limit

Maximum number of SNMP requests that will be processed each second by NetDefendOS. Should
SNMP requests exceed this rate then the excess requests will be ignored by NetDefendOS.

Default: 100

System Contact

The contact person for the managed node.

Default: N/A

System Name

The name for the managed node.

Default: N/A

System Location

The physical location of the node.

Default: N/A

Interface Description (SNMP)

What to display in the SNMP MIB-II ifDescr variables.

Default: Name

Interface Alias

What to display in the SNMP ifMIB ifAlias variables.

Default: Hardware

2.4.1. SNMP Advanced Settings

Chapter 2. Management and Maintenance

61

«
...
59
60
61
62
63
...
»

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments