manualshive.com logo in svg

D-Link 800 - DFL 800 - Security Appliance, User Manual

The D-Link 800 - DFL 800 - Security Appliance is a top-of-the-line device designed to provide robust security and protection for your network. Equipped with advanced features and functionalities, this product guarantees utmost safety. Enhance your user experience by downloading the comprehensive User Manual for free from our website today.

Share
Download
background image

The lan interface on the master and the lan interface on the slave would be connected to the
same switch which then connects to an internal network. Similarly the wan interface on the
master and the wan interface would connect to a switch which in turn connects to the external
Internet.

The hardware of the slave does not need to exactly match the master, however it is
recommended that hardware with similar performance is used in order to avoid any throughput
degradation after a failover.

4.

Decide on a shared IP address for each interface in the cluster. Some interfaces could have
shared addresses only while others could also have unique, individual IP addresses for each
interface specified in a IP4 HA Address object. The shared and individual addresses are used as
follows:

•

The individual addresses specified for an interface in an IP4 HA Address object allow
remote management through that interface. These addresses can also be "pinged" using
ICMP provided that IP rules are defined to permit this (by default, ICMP queries are
dropped by the rule set).

If either unit is inoperative, its individual IP addresses will also be unreachable. These IP
addresses are usually private but must be public if management access across the public
Internet is required.

If an interface is not assigned an individual address through an IP4 HA Address object then
it must be assigned the default address localhost which is an IP address from the subnet
127.0.0.0/8.

ARP queries for the individual IP addresses specified in IP4 HA Address objects are
answered by the firewall that owns the address, using the normal hardware address, just as
with normal IP units.

•

One single shared IP address is used for routing and it is also the address used by dynamic
address translation, unless the configuration explicitly specifies another address.

Note

The shared IP address cannot be used for remote management or monitoring
purposes. When using, for example, SSH for remote management of the D-Link
Firewalls in an HA Cluster, the individual IP addresses of the firewall's
interfaces must be used and these are specified in IP4 HA Address objects as
discussed above.

11.3.2. NetDefendOS Manual HA Setup

To set up an HA cluster manually, the steps are as follows:

1.

Connect to the master unit with the WebUI.

2.

Go to System > High Availability.

3.

Check the Enable High Availability checkbox.

4.

Set the Cluster ID. This must be unique for each cluster.

5.

Choose the Sync Interface.

6.

Select the node type to be Master.

7.

Go to Objects > Address Book and create an IP4 HA Address object for each interface pair.
Each must contain the master and slave interface IP addresses for the pair.

11.3.2. NetDefendOS Manual HA
Setup

Chapter 11. High Availability

414

Summary of Contents for 800 - DFL 800 - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 800 - DFL 800 - Security Appliance

Watchguard DS3AE5 Quick Start Manual preview
DS3AE5
Brand: Watchguard Pages: 27
StarTech.com EC13942A2 Instruction Manual preview
EC13942A2
Brand: StarTech.com Pages: 2
NETGEAR FWG114P - ProSafe 802.11g Wireless Firewall Reference Manual preview
FWG114P - ProSafe 802.11g Wireless Firewall
Brand: NETGEAR Pages: 70
ZyXEL Communications ZyWALL 1050 Manual preview
ZyWALL 1050
Brand: ZyXEL Communications Pages: 1101
ZyXEL Communications ZyWALL USG Series Reference Manual preview
ZyWALL USG Series
Brand: ZyXEL Communications Pages: 426

Brands by name

Popular brands

Load more brands