CMC 30 HP30, Installation And Operation Instruction Manual

Page: 74 / 218

Chapter 5 - Parameter List
5-14
Keypad Display Setting Range
Code Description
LCD 7-Segment LCD 7-Segment
Units
Factory
Default
Adj.
During
Run
Page
I/O-58
Transient Time to 1 st Step
of Sequence 2
Seq1 / 2T
58
0.1 to 6000 [sec] 0.1 1.1 [sec] Yes
I/O-59
Steady Speed Time at 1 st
Step of Sequence 2
Seq1 / 2S
59
0.1 to 6000 [sec] 0.1 1.1 [sec] Yes
Reverse 0
I/O-60
Motor Direction of 1 st Step
of Sequence 2
Seq1 / 2D
60
Forward 1
- Forward Yes
6-2
I/O-99 Return Code
Not
displayed
99
Not available
[PROG/ENT]
or
[SHIFT/ESC]
- 1 Yes
5.5 External Group [EXT]
EXT group appears only when the corresponding Sub-Board is installed.
Keypad Display Setting Range
Code Description
LCD 7-Segment LCD 7-Segment
Units
Factory
Default
Adj.
During
Run
Page
EXT-00 Jump to Desired Code #
Jump code
Not displayed 0 to 99 Not available 1 1 Yes 6-2
None 0
SUB-A 1
SUB-B 2
SUB-C 3
SUB-D 4
SUB-E 5
SUB-F 6
SUB-G 7
EXT-01 Sub Board Type Display
Sub B/D
01
SUB-H 8
- None
Automa
tically
set
6-2
Speed-L 0
Speed-M 1
Speed-H 2
XCEL-L 3
XCEL-M 4
XCEL-H 5
Dc-brake 6
2nd Func 7
Exchange 8
- Reserved - 9
Up 10
Down 11
3-Wire 12
Ext Trip-A 13
Ext Trip-B 14
iTerm Clear 15
EXT-02 Multi-Function Input
Terminal ‘P4’ Define
P4 define
02
Open-loop 16
- XCEL-L Yes 6-2