6) Remove the slack from the cable between the copier and the RDD; keep the excess
cable to the RDD using the harness band
!3
.
Fig. 9-606
7) Shift bit 4 of the DIP switch 2
!4
to ON so that the communication mode between the
RDD and the copier is IPC mode.
Fig. 9-607
8) If the ROM IC6
!5
is mounted on the RDD’s PCB, shift bit 7 of the DIP switch 2
!6
to ON; otherwise, shift bit 7 of the DIP switch 2 to OFF.
1. If the ROM (IC6;
!5
) is not mounted, you need not mount it.
2. If you are mounting or replacing the ROM (IC6;
!5
) for upgrading the RDD, be
sure to shift bit 7 of the DIP switch 2
!6
to ON.
LED1 LED2 LED3
2
1
LED5
LED6
LED4
IC6
SW1
SW4
SW3
6
1
BAT1
CN4
1
2
CN3
CN2
12345678
SW2
!4
!3
COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 9 INSTALLATION
9-59
Note:
