9-1Adjusting the Position of the Pick-Up Roller Releasing Solenoid (front paper
deck)
Adjust the position of the solenoid so that the left edge of the right solenoid arm 2 is
57.2 ±0.5 mm from the center of the solenoid mount as shown in Figure 11-226.
Figure 11-234a
9-2 Adjusting the Position of the Pick-Up Roller Releasing Solenoid (paper deck-
A1)
Before removing the deck pick-up roller releasing solenoid
q
from the support plate,
remember the position of the two fixing screws
w
on the solenoid with reference to the
scale on the support plate. Or, mark the position of the solenoid on the support plate with
a scribe.
If you are installing the solenoid on its own, be sure to fix it in its initial position.
Figure 11-234b
q
w
A
57.2±0.5mm
COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
11-31
