manualshive.com logo in svg

Canon NP6251, Service Manual

The Canon NP6251 Service Manual is a comprehensive guide that allows users to troubleshoot and repair their Canon NP6251 printer. This manual is available for free download on manualshive.com, providing users with easy access to the essential information needed to maintain and maximize the performance of their device.

Share
Download
background image

COPYRIGHT  © 1997  CANON INC.                       CANON NP6350/NP6251 REV.0 JULY 1997 PRINTED IN JAPAN (IMPRIMÉ AU JAPON)

v

CONTENTS

CHAPTER 1  GENERAL DESCRIPTION

I.

FEATURES.........................................1-1

II.

SPECIFICATIONS ..............................1-2
A. Copier ............................................1-2

1. Type..........................................1-2
2. Mechanisms .............................1-2
3. Performance .............................1-3
4. Others.......................................1-6

B. Paper Deck-A1 ..............................1-9

III.

NAMES OF PARTS ............................1-10
A. External View.................................1-10
B. Cross Section ................................1-12

1. Copier .......................................1-12

IV.

OPERATING THE MACHINE.............1-13
A. Control Panel.................................1-13
B. Extended Modes ...........................1-14
C. User Mode .....................................1-15

1. Types of User Modes ...............1-15

V.

ROUTINE MAINTENANCE BY THE 
USER..................................................1-19

VI.

POINTS TO NOTE (BY THE USER) .1-19

VII. IMAGE FORMATION..........................1-20

A. Outline ...........................................1-20

CHAPTER 2  BASIC OPERATION

I.

BASIC MECHANISMS .......................2-1
A. Functional Construction.................2-1
B. Outline of the Electrical Circuitry ...2-2
C. Basic Sequence of Operations......2-4

1. Basic Sequence of Operations 

at Power-On (1/2).....................2-4

2. Basic Sequence of Operations 

at Power-On (2/2).....................2-5

3. Basic Sequence of 

Operations ................................2-7

4. Basic Sequence of Operations 

in Page Separation Mode.........2-9

D. Main Motor (M1) Control Circuitry..2-11

1. Outline ......................................2-11
2. Operation..................................2-12
3. Detecting an Error ....................2-12

E. Inputs to the DC Controller............2-13
F. Outputs from the DC Controller.....2-21
G. Inputs to and Outputs from 

Accessories ...................................2-32

CHAPTER 3  EXPOSURE SYSTEM

I.

OUTLINE OF OPERATION ................3-1
A. Varying the Reproduction Ratio.....3-1

II.

LENS DRIVE SYSTEM ......................3-2
A. Moving of the Lens ........................3-2

1. Outline of the Movement ..........3-2
2. Moving the Lens .......................3-3
3. Lens Motor Control Circuit .......3-3
4. Moving the Lens .......................3-4

III.

SCANNER DRIVE SYSTEM ..............3-6
A. Scanner Movement .......................3-6

1. Outline of Movement ................3-6
2. Relationship between the

Scanner Sensors and the
Signals......................................3-7

3. Basic Sequence of Operations..3-8
4. Movement of the Scanner in 

Page Separation Mode ............3-9

5. Movement of the Scanner with 

the RDF in Use (A4, 2 originals,
1 copy)......................................3-11

6. Movement of the Scanner with 

the RDF in Use (A4, 2 copies)..3-13

7. Scanner Motor (M3) Control 

Circuit .......................................3-17

IV.

OTHERS.............................................3-20
A. Original Size Detection..................3-20

1. Outline of Detection..................3-20
2. Operation..................................3-21
3. Sizes of Originals .....................3-22

V.

DISASSEMBLY AND ASSEMBLY......3-23
A. Scanner Drive Assembly ...............3-24

1. Removing the Scanner Drive 

Motor ........................................3-24

Summary of Contents for NP6251













































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NP6251

Canon IMAGERUNNER 2020 Specifications preview
IMAGERUNNER 2020
Brand: Canon Pages: 4
Panasonic SC-PM33 Operating Instructions Manual preview
SC-PM33
Brand: Panasonic Pages: 16
Panasonic U1 - Toughbook - Atom Z520 Operating Instructions Manual preview
U1 - Toughbook - Atom Z520
Brand: Panasonic Pages: 56
Panasonic DP-200 Operating Instructions Manual preview
DP-200
Brand: Panasonic Pages: 63
Panasonic DP-2000 Operating Instructions Manual preview
DP-2000
Brand: Panasonic Pages: 180
Royal Copystar Ri 6230 Technical Bulletin preview
Ri 6230
Brand: Royal Copystar Pages: 20
TASKalfa 3500i Troubleshooting Manual preview
3500i
Brand: TASKalfa Pages: 112
Olivetti d-Color MF2552 plus Service Manual preview
d-Color MF2552 plus
Brand: Olivetti Pages: 740
Canon C3226i Quick Start Manual preview
C3226i
Brand: Canon Pages: 20
HP 510 - Notebook PC Maintenance And Service Manual preview
510 - Notebook PC
Brand: HP Pages: 123
HP 4200 - LaserJet B/W Laser Printer User Manual preview
4200 - LaserJet B/W Laser Printer
Brand: HP Pages: 142
HP C8372A - Digital Copier Printer 610 Color Inkjet Printing Manual preview
C8372A - Digital Copier Printer 610 Color Inkjet
Brand: HP Pages: 48
HP C8431A - Digital Copier 310 Color Inkjet Basic Manual preview
C8431A - Digital Copier 310 Color Inkjet
Brand: HP Pages: 60
HP Designjet cc800ps Service Manual preview
Designjet cc800ps
Brand: HP Pages: 120
HP 510 - Notebook PC Reference Manual preview
510 - Notebook PC
Brand: HP Pages: 102
HP Designjet cc800ps Reference Manual preview
Designjet cc800ps
Brand: HP Pages: 28
HP CM8050 Color MFP Service Manual preview
CM8050 Color MFP
Brand: HP Pages: 60
HP Color Copier 120 Basic Manual preview
Color Copier 120
Brand: HP Pages: 54

Brands by name

Popular brands

Load more brands