manualshive.com logo in svg

Canon NP6251, Service Manual

The Canon NP6251 Service Manual is a comprehensive guide that allows users to troubleshoot and repair their Canon NP6251 printer. This manual is available for free download on manualshive.com, providing users with easy access to the essential information needed to maintain and maximize the performance of their device.

Share
Download
background image

F. Re-Pick Up from the Holding Tray

Pick-up/separation takes place when the Copy Start key is pressed for copying on

the second side.

When the Copy Start key is pressed, the holding tray re-pick up solenoid (SL6) turns

on to rotate the holding tray re-pick up roller, thereby feeding the copy paper in the
direction of the feeding roller/separation belt; at the same time, the holding tray weight
solenoid (SL7) turns on to lower the weight plate on the copy paper so as to assist
feeding of copy paper.

If double feeding occurs, i.e., if two or more sheets are being sent to the feeding

roller/separation belt by the holding tray re-pick up roller, the separation belt serves to
push the top sheet back to the holding tray.

Reference:

The weight plate is lowered only when the first sheet is re-picked up and when the
last sheet is picked up.

Figure 5-618

Separation belt

Weight plate

Feeding roller

Copy paper

Holding tray 
re-pick up roller

COPYRIGHT © 1997 CANON INC.                CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 5  PICK-UP/FEEDING SYSTEM

5-37

Summary of Contents for NP6251













































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NP6251

Oce 7050 Technical & Service Manual preview
7050
Brand: Oce Pages: 275
Reflecta X6 TouchScan User Manual preview
X6 TouchScan
Brand: Reflecta Pages: 46

Brands by name

Popular brands

Load more brands