2. Replacing the Delivery Roller Leaf Spring
When removing the stapler sorter or the sorter from the machine (i.e., to use the copy
tray), you must replace the two leaf springs of the delivery roller with leaf springs (weaker
spring pressure) identified with a blue label.
When installing a stapler sorter or a sorter to the machine, check to find out if the two
leaf springs at the center are stronger than the two leaf springs on the sides; if so, do not
perform the steps that follow.
COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 9 INSTALLATION
9-17
Work
Remove the two screws, and remove
the cover from the fixing/delivery
assembly.
Remove the screw, and remove the
two leaf springs (w/ rolls) at the center;
then, separate the leaf springs and the
roll.
Fit the roll to the leaf spring that comes
with the machine, and install the leaf
spring to the fixing/delivery assembly.
Install the cover to the fixing/delivery
assembly (2 screws), and slide in the
fixing/delivery assembly into the
machine, and close the front door.
Step
1
2
3
4
Remarks
Screw
Screw
Screw
Screw