COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
11-10
7. Adjusting the AE Slope
After executing AE auto adjustment, make a copy of a newspaper (or a rather dark
original). If the copy is foggy or too light, perform the following:
1) Open the front door, and insert the door switch actuator into the door switch
assembly.
2) Press the service mode switch over the cover with a clip.
3) Select ‘AE_SLOP’ in service mode (
).
4) Place a newspaper (or a relatively dark original) on the copyboard.
5) Change the setting using the numeric keypad, and press the user mode key (
]
).
q
If you decrease the setting in adjustment mode,
→
Copies of a newspaper will be lighter.
w
If you increase the setting in adjustment mode,
→
Copies of a newspaper will be darker.
Note:
You may press the Copy Start key to make copies.
6) Press the Reset key twice to end service mode.
]
3
]
