COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV.0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
1-16
Table 1-402(b)
Item
Inch Input
Wait Time
Indicator
Buzzer ON/OFF
Just Fit Ratio
Just Fit Center
Just Fit Non-
Image
Pre-Heat
Initialize Settings
Standard Mode
Change
Descriptions
Use it to enable or disable inch input when selecting
binding width, hole margin width, and zoom
program.
ON:
Enable inch input.
OFF: Disable inch input.
Use it to show or not show how long the on-going
copying takes.
ON:
Show.
OFF: Do not show.
Use it to specify whether the buzzer should be
sounded in response to inputs, warnings, standby,
and copying end.
ON:
Enable the buzzer.
OFF: Disable the buzzer.
Use it to select the reproduction ratio for the just fit
function between 90% and 99% in 1% increments.
Use it to enable or disable centering in just fit mode.
ON:
Enable centering.
OFF: Disable centering.
Use it to enable or disable non-imaging in just fit
mode.
ON:
Enable non-imaging.
OFF: Disable non-imaging.
Use it to select a power saving rate in pre-heat
mode.
10%:
at 10%
25%:
at 25%
50%:
at 50%
No resetting: no saving (at 0%)
Use it to initialize user mode settings.
Use it to store the mode to be selected in response
to a press on the Reset key (or in auto clear). You
may select factory default as post-initialization
mode.
Remarks
Default: OFF
Default: OFF
Default: ON
Default: 93%
Default: ON
Default: OFF
A saving rate is
in relation to the
machine’s total
consumption.
Default: No
resetting.
Default
Copy ratio,
100%; auto
paper select,
ON; density
control, manual;
copy count, 1.
