5. Removing the Lifter Cable (deck front)
1) Open the compartment of the deck; remove all copy paper, if any.
2) Remove the screw, and remove the trailing edge guide plate from inside the
compartment.
3) Push the sensor lever
q
of the paper supply sensor inside the compartment with a
finger to lower the lifter until the holes (left-right) in the compartment side plate and
the holes (left/right) in the lifter match; then, insert two screwdrivers (to position the
lifter).
Figure 8-406
4) Remove the front cover of the deck. (See p. 8-21.)
5) Remove the four screws
e
, and remove the roll support plate
r
.
Figure 8-407
e
r
q
w
COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 PAPER DECK-A1
8-38
