Canon iR5570 Series, Service Manual

Page: 626 / 684

Chapter 16
16-58
16.6.2 FEEDER
16.6.2.1 FEEDER List
0009-6359
T-16-59
16.6.3 SORTER
16.6.3.1 SORTER List
0009-6361
T-16-60
16.6.4 BOARD
16.6.4.1 BOARD List
0009-6268
T-16-61
COPIER > FEEDER > OPTION
Sub-item Description Level
SIZE-SW Use it to enable detection of a mix of AB and inch originals.
setting
0: ON (do not detect; default); 1: OFF (detect)
1
LS-DBL Use it to enable/disable ADF high-speed duplex mode.
setting
0: enable (execute high-speed duplex mode; normal mode; default)
1: disable (do not execute high-speed duplex mode; low-speed duplex
mode)
1
STAMP-SW Use it to indicate the presence/absence of a stamp. (If fitted, set '1' for
STAMP-SW).
setting
0: stamp absent
1: stamp present (default)
1
COPIER > SORTER > OPTION
Sub-item Description Level
BLNK-SW Use it to set the margin width on both sides of a crease when the saddle
stitcher is in use.
setting
0: normal width (5 mm)
1: extra width (10 mm; default)
1
MD-SPRTN Use it to enable/disable accessory-independent mode in the event of a
finisher error.
setting
0: normal (disable accessory-independent mode; default)
1: enable (do not staple or align)
1
COPIER > BOARD > OPTION
Sub-item Description Level
FONTDL Use it to enable/disable display of the setting screen for font service when the
PS kanji font downloaded is in use.
setting
0: disable (do not display; default)
1: enable (display)
1
MENU-1 to 4 Use it to enable/disable display of levels 1 thorough 4 for the printer settings
menu.
setting
0: disable (do not display; default)
1: enable (display)
2