Canon iR5570 Series, Service Manual

Page: 548 / 684

Chapter 15
15-8
8001 In the presence of light, the incoming light voltage
HP sensor does not go off.
- Turn off and the back on the main power.
8002 In the absence of light, the incoming light voltage
HP sensor does not go on.
E5F0 There is a saddle paper positioning error.
0001 The paper positioning plate home position sensor
does not go on even when the paper positioning
plate motor has been driven for 1.33 sec.
paper positioning plate motor (M4S), paper
positioning plate home position sensor (PI7S)
- Check the paper positioning plate motor (M4S)
and the paper positioning plate home position
sensor (PI7S).
0002 The paper positioning plate home position sensor
does not go off even when the paper positioning
plate motor has been driven for 1 sec.
paper positioning plate motor (M4S), paper
positioning plate home position sensor (PI7S)
E5F1 There is a saddle paper folding error.
0001 The number of detection pulses of the paper
folding motor clock sensor is lower than a specific
value.
paper folding motor (M2S), paper folding motor
clock sensor (PI4S)
- Check the paper folding motor (M2S) and the
paper folding motor clock sensor (PI4S).
0002 The start of the paper folding home position sensor
does not change even when the paper folding motor
has been driven for 3 sec.
paper folding motor (M2S), paper folding motor
clock sensor (PI4S)
E5F2 There is a saddle guide error.
0001 The guide home position sensor does not go on
even when the guide motor has been driven for
0.455 sec.
guide motor (M3S), guide home position sensor
(PI13S)
- Check the guide motor (M3S) and the guide
home position sensor (PI13S).
0002 The guide home position sensor does not go off
even when the guide motor has been driven for 1
sec.
guide motor (M3S), guide home position sensor
(PI13S)
E5F3 There is a saddle alignment error.
0001 The aligning plate home position sensor does not
go on even when the aligning motor has been
driven for 0.5 sec. (if at time of initialization, 1.67
sec)
alignment motor (M5S), aligning plate home
position sensor (PI5S)
- Check the alignment motor (M5S) and the
aligning plate home position sensor (PI5S).
0002 The aligning plate home position sensor does not
go off even when the aligning plate has been driven
for 1 sec.
alignment motor (M5S), aligning plate home
position sensor (PI5S)
E5F4 There is a saddle rear stapler error.
0001 The stitching hone position sensor does not go on
even when the stitching motor (rear) has been
driven in reverse for 0.5 sec or more.
stitching motor (rear, M6S), stitching home
position sensor (rear, MS5S)
- Check the stitching motor (rear, M6S) and the
stitching home position sensor (rear, MS5S).
0002 the stitching home position sensor does not go off
even when the stitching motor (rear) has been
driven in normal direction for 0.5 sec or more.
stitching motor (rear, M6S), stitching home
position sensor (rear, MS5S)
E5F5 There is a saddle front stapling error.
0001 The stitching home position sensor does not go on
even when the stitching motor (front) has been
driven in reverse for 0.5 sec or more.
stitching motor (front, M7S), stitching home
position sensor (front, MS7S)
- Check the stitching motor (front, M7S) and the
stitching home position sensor (front, MS7S).
0002 The stitching home position sensor does not go off
even when the stitching motor (front) has been
driven in normal direction for 0.5 sec or more.
stitching motor (front, M7S), stitching home
position sensor (front, MS7S)
E5F6 There is a saddle butting error.
Code Description Remedy