Canon iR5570 Series, Service Manual

Page: 395 / 684

Chapter 9
9-41
F-9-122
9.5.14 External Delivery Sensor
9.5.14.1 Removing the Outside Delivery Sensor
0009-4848
1) Remove the fixing feeding unit from the machine.
2) Remove the outside delivery roller.
3) Remove the 2 screws [1], and pull out the sensor support plate toward
the outside.
F-9-123
4) Disconnect the connector [1], and detach the outside delivery jam
sensor [2] from the sensor support plate.
F-9-124
9.5.15 Internal Delivery Sensor
9.5.15.1 Removing the Inside Delivery Sensor
0009-4878
1) Remove the inside delivery roller.
2) Remove the screw [1], and remove the protrusion [2]; then, pull out
the sensor support plate [3] toward the outside.
F-9-125
3) Disconnect the connector [1], and detach the inside delivery sensor
[2] from the sensor support plate [2].
F-9-126
9.5.16 Fixing Inlet Sensor
9.5.16.1 Removing the Fixing Inlet Sensor
0009-4866
1) Slide out the fixing feeding unit.
2) Check the position (front, rear) of the fixing inlet guide base. (Locate
the marking line [1] of the fixing inlet guide base in relation to the
indexes [3] of the height adjusting support plate.
Thereafter, remove the 2 screws [3], and disconnect the connector [4];
then, detach the fixing inlet guide base [5].
[1] [2]
[1]
[2]
[2] [1]
[1] [2] [3]
[1] [2]