Canon iR5570 Series, Service Manual

Page: 341 / 684

Chapter 8
8-77
F-8-242
8.10.26.4 Removing the Feeding Belt
0009-5141
1) Disconnect the two connectors [1], and remove the screw [2]; then,
detach the harness guide [3].
F-8-243
2) Remove the two mounting screws [1], and detach the fixing feeding
unit releasing lever support [2].
F-8-244
3) Remove the E-ring [1], bearing [2], and two screws [3] from the front.
F-8-245
4) Remove the E-ring [1], pulley [2], pin [3], three screws [4], E-ring [5],
and bearing [6]; then, detach the feeding belt unit [7].
F-8-246
5) Remove the mounting screw [1], and detach the cover [2].
6) Detach the feeding belt [3] and the postcard belt [4].
F-8-247
8.10.27 Duplexing Unit
8.10.27.1 Removing the Duplex Unit
0009-5161
1) Slide the duplex unit out of the machine.
2) Remove the three screws [1] and two knobs [2]; then, detach the front
cover [3].
3) Holding the left and right grips [4] of the duplex unit, take it out of
the machine.
Take care not to trap your hand between the grip and the rail. Further, do
not place the duplex unit where it may suffer damage.
[1]
[3]
[1]
[1]
[2]
[1]
[2]
[1]
[1] [3] [2]
[7]
[4] [5]
[3]
[2]
[1]
[6]
[3]
[4]
[2]
[1]