Canon iR5570 Series, Service Manual

Page: 613 / 684

Chapter 16
16-45
<USER>
T-16-52
STNBY-TM Use it to switch over the standby shift time.
setting
0: normal (default)
1: increase standby shift time until possibility of image distortion is absent
2
KSIZE-SW for future use 2
COPIER > OPTION >USER
Sub-item Description Level
COPY-LIM Use it to put an upper limit to the number of copies.
setting: 1 to 9999 (default: 9999)
1
SLEEP Use it to enable/disable the sleep function.
setting
0: off
1; on (default)
1
WEB-DISP Use it to enable/disable the fixing web length warning message.
setting
0: off (do not display)
1: on (display; default)
If set to '0', the message will only be on the service mode screen.
1
W-TONER Use it to enable/disable the waste toner case full message.
setting
0: off (do not display)
1: on (display; default)
If set to '0', the message will be only on the service mode screen.
1
COUNTER1 Use it to set soft counter 1 of the user mode screen.
101: total 1 (fixed)
1
COUNTER2 Use it to set soft counter 2 of the user mode screen.
setting: 0 to 999
1
COUNTER3 Use it to set soft counter 3 of the user mode screen.
setting: 0 to 999
1
COUNTER4 Use it to set soft counter 4 of the user mode screen.
setting: 0 to 999
1
COUNTER5 Use it to set soft counter 5 of the user mode screen.
setting: 0 to 999
1
COUNTER6 Use it to set soft counter 6 of the user mode screen.
setting: 0 to 999
1
CONTROL Use it to limit the use of the control card for PDL jobs.
setting
0: do not limit (default)
1: limit
1
B4-L-CNT Use it to specify where B4 should be counted as large or small size for soft
counters 1 thorough 6.
0: count as small size (default)
1: count as large size
1
COPY-JOB Use it to enable/disable copy job reservation with a card reader/coin vendor
in use.
setting
0: enable copy job reservation (default)
1: disable copy job reservation
1
PR-PSESW Use it to enable/disable the print pause function switch.
setting
0: disable print pause function (default)
1: enable print pause function (display print output stop/resume button on
user screen)
1
IDPRN-SW Use it to switch over count increment jobs for the group control counter.
0: for PRINT, increment the following: box print, report print, SEND local
print, PDL print (default)
1: for PRINT, increment the following: report print, SEND local print, PDL
print
1
CNT-SW Use it to switch over display of charge counter default items.
setting
0: default total 1 (101; default)
1: default total 2 (102), copy total 2 (202), total A total 2 (127)
2: default total 1 (101), total small (104), total large (103), scan total 1 (501)
1
TAB-ACC Use it to enable/disable automatic switchover of cassettes for tab (index)
paper.
setting
0: do not change over between tab sheets (default)
1: change over between tab sheets
1
COPIER > OPTION > BODY
Sub-item Description Level