Canon iR5570 Series, Service Manual

Page: 78 / 684

Chapter 2
2-20
2.4 Troubleshooting the Network
2.4.1 Overview
0008-8563
Perform this procedure only when connecting the machine to networks.
If the machine fails to be connected to networks, any of the following causes is probable.
a. Connection failure between networks and the machine
b. TCP/IP setting failure of the machine
c. User network failure
d. Main controller PCB failure
The detailed check methods are as follows.
2.4.2 Checking with Loopback Address
0008-8564
The loopback address returns before the network controller. Therefore, you can check whether TCP/IP settings of the machine are appropriate by executing
Ping with this address.
1) Enter the loopback address (127.0.0.1) in PING.
- If NG is displayed, check TCP/IP settings of the machine again, and re-execute Ping.
- If OK is displayed, perform the next check.
2.4.3 Checking with Local Host Address
0008-8565
The local host address is the IP address of the machine. Since the local host address returns in response to the network controller by executing Ping with
the address, you can check whether the network controller (main controller PCB) is in a normal condition.
1) Enter the IP address of the machine in PING.
If NG is displayed, take the following actions, and re-execute Ping.
- IP address error of the machine: Check to see again if the IP address settings of the machine are appropriate. Ask the system administrator whether the
allocated IP address is valid.
- Failure in the main controller PCB: Replace the main controller PCB
If OK is displayed, a cause may be user's network environment. Inform the system administrator of the current situation, and ask for measures.