Canon iR5570 Series, Service Manual

Page: 66 / 684

Chapter 2
2-8
F-2-11
5) Remove the cardboard box on the skid, and take out the two slope
plates, which have been stored in the center of skid.
If it is difficult to take out the slope plates, move the main body to the
trailing edge of the skid.
6) Turn the slope plates upside down, match the pinholes of the skid to
those of the slope plates, and inlet the pin to the hole respectively.
F-2-12
7) Hold the two grips (front/rear) of the main body, slide the main body
on the slopes, and take it down from the skid.
Be aware that the wheels will not be dropped out of the skid.
8) Remove the grips attached using an appropriate tool (e.g.: a flat-blade
screwdriver) while pushing the leaf spring.
F-2-13
9) Remove the tape from the machine.
10) Check to see if all accessories are contained in the cardboard box
that comes with the machine.
2.2.3 Installing the Scanner
0008-7942
1) Open the ADF and eliminate the packaging materials.
2) Remove the scanner screw [1].
F-2-14
Be sure to have the user keep the scanner screw since it is used when the
machine is moved.
2.2.4 Installing the Fixing Assembly
0008-7946
1) Turn the fixing feeder assembly release lever [1] in the direction of
the arrow (left) to release the transfer/separation corona assembly.
Slide out the fixing feeder unit [2] to the front.
[1]
[1]