Canon iR5570 Series, Service Manual

Page: 615 / 684

Chapter 16
16-47
Soft Counter Specifications
100s: total
200s: copy (as needed, add 001 and up)
300s: print
400s: copy + print
500s: scan
600s: box print
PCL-COPY Use it to set PCL command COPIES Meru/Pintubo/Hood compatibility.
0: use page-based control according to COPIES command value specified
for each page (default)
1: Meru/Pinatubo/Hood compatibility mode
2 to 6535: reserved
2
PRJOB-CP Use it to set the CCV count pulse generation for reception and report output.
setting
0: do not generate count pulse (default)
1: generate count pulse
2
DPT-ID-7 Use it to select the 7-character input method for group ID registration and
authentication.
setting
0: normal (default)
1: use 7-character input
2
RUI-RJT Use it to enable/disable connection of the HTTP port at 3 failed attempts at
authentication by the RUI.
setting
0: make invalid (default)
1: keep valid
2
CTM-S06 Use it to specify whether a password should be removed from the export file
(file transmission address).
setting
0: do not remove password from export file (default)
1: remove password from export file
2
FREG-SW Use it to enable/disable display of the free area of the MEAP counter
(SEND).
setting
0: do not display (default)
1: display
2
IFAX-SZL Use it to limit transmission size for i-fax transmission.
setting
0: keep transmission size limit valid (using server/not using server)
1: keep transmission size limit invalid (only when not using server; default)
2
IFAX-PGD Use it o enable/disable page-based division transmission (only when the
transmission data size upper limit is exceeded).
setting
0: do not permit page-based division transmission in i-fax simple mode
(default)
1: enable page-based division transmission in i-fax simple mode
2
MEAPSAFE Use it to enable/disable switchover to safe mode for MEAP.
0: off (default)
1: on (safe mode)
2
AFN-PSWD Use it to limit access to user mode.
setting
0: off (shift to user mode screen without prompting for password; default)
1: on (shift to user mode after password match)
2
PTJAM-RC Use it to enable/disable PDL jam recovery.
setting
0: off (disable recovery)
1: on (enable recovery; default)
2
SLP-SLCT Use it enable/disable use of an existing network-based application.
setting
0: do not use (default)
1: use
When set to '1', no shift takes place to sleep mode 3.
2
PS-MODE Use it to set PS compatibility mode.
setting
0: not compatible (default)
1: offer PS type 3 halftone command compatibility (dither reverse)
2: compatible with priority on resolution
3: reserved
4: compatible for EFI landscape/portrait mix
5 to 65535: reserved
2
CNCT-RLZ Use it to enable/disable the use of the connection serialization function.
setting
0: off (disable connection serialization function; default)
1: on (enable connection serialization function)
2
COPIER > OPTION >USER
Sub-item Description Level