Canon iR5570 Series, Service Manual

Page: 428 / 684

Chapter 10
10-22
F-10-56
3) Disconnect the 2 connectors [1], and remove the 2 screws [2]; then,
detach the connector base [3].
F-10-57
4) Remove the 2 screws [1], and detach the waste toner bottle holder [2].
Take care not to spill the waste toner.
F-10-58
10.5.6.6 Removing the Motor Drive Base
0009-3941
1) Disconnect the 10 connectors, and free the harness [1] from the 9 wire
saddles.
2) Remove the 4 screws [2], and detach the motor driver PCB together
with its base [3].
F-10-59
10.5.6.7 Cassette Pickup Assembly
0009-5221
The removal procedure of a right door and a left door is the same. An
illustration makes a right door an example and explains it.
1) Slide out the right deck / cassette3 / cassette4.
2) Open the right upper cover and the right lower cover.
An attempt to remove the pickup assembly without removing the deck
will cause the lifter to get trapped, not holding the pickup assembly from
sliding out.
3) Remove the mounting screw [1], and detach the connector cover [2];
then, disconnect the connector [3].
4) Remove the three mounting screws [4], and detach the pickup
assembly [5].
[1] [1]
[2]
[3]
[2]
[1] [3]
[1]
[1]
[2]
[1] [1]
[1] [2] [2]
[2] [2] [3]