Canon ImageRunner iR8500 Series, Service Manual, Page: 980 / 1122

Chapter 17
17-136
DATE-DSP Switching the date display format
2
<Setting value>
0: YYMM/DD
1: DD/MM/YY
2: MM/DD/YY
MB-CCV Limiting the mailbox control card user
2
<Setting value>
0: No [Default]
1: Yes
PR-D-SEL Use it to set the density of printing (PDL input).
2
<Setting value>
0 to 8 (4: default)
0 (light) <=> 4 (standard) <=> 8 (dark)
TRY-STP Setting output or no output in the tray full state
2
<Setting value>
0: Ordinary mode (Interrupt when the finisher tray is full) [Default]
1: Interrupt by height detection only
MF-LG-ST Setting the long mode key
2
<Setting value>
0: Ordinary [Default]
1: Display a long mode key on the corresponding mode screen
SPECK-DP Use it to enable/disable indication of a warning for dust detection in
streamreading.
2
<Setting value>
0: disable indication (default), 1: enable indication
CNT-DISP Setting whether or not to display a serial number when the counter confirmation
key is pressed
2
<Setting value>
0: Display a serial number [Default]
1: Do not display a serial number
PH-D-SEL Setting the number of lines for printing in Photo mode
2
<Setting value>
0: 141 lines [Default]
1: 134 lines
NW-SCAN Enabling or disabling the network scan function
2
<Setting value>
0: Network scan function disabled [Default]
1: Network scan function enabled
MEMO:
Not changeable for anything in Japan
Always 1 for PSPCL outside Japan
Changeable for other outside Japan
INS-C/S Use it to expand the inserter function.
2
<Setting value>
0: support cover only (default)
1: support cover + interleaf (multi inserter)
TBIC-RNK Use it to reduce uneven intervals.
2
<Setting value>
1 to 5 (default: 1)
ORG-ODR Use it to set the sequence of reading double-sided original when original
orientation detection is enabled.
2
<Setting value>
0: read from back to face (default)
1: read from face to back
HDCR-DSP Setting whether or not display HDD clearance in User mode and changing the
contents of clearance
2
<Setting value>
1: Clear once with 0 [Default]
2: Clear once with random data
3: Clear three times with random data
BCK-CVR Use it to enable or disable the back cover mode function.
2
<Setting value>
0: disable back cover mode
1: enable back cover mode
JOB-INVL Setting the job interval at interrupt
2
<Setting value>
0: Output the next job continuously in interrupt copying (Standard) [Default]
1: Start outputting the next job after the last paper of the interrupted copy job is
output
2: Start outputting the next job after the last paper of all jobs is output
COPIER > OPTION >USER
Sub-item Description Level