Canon ImageRunner iR8500 Series, Service Manual, Page: 560 / 1122

Chapter 11
11-30
F-11-58
When mounting, be sure to match the marking [7] of the control panel
harness against the wire saddle at the rear.
10) Remove the 2 RS tightening screws [1], and detach the original
delivery tray [2].
F-11-59
11) Open the toner cartage [1], and remove the 3 RS tightening screws
[2]; then, while paying attention to the claw [4], detach the upper
right cover [3].
F-11-60
12) Remove the 6 RS tightening screws [1]; then, while paying attention
to the claw [3], detach the lower arm [2].
F-11-61
13) Open the 2 edge saddles [1], and pull out the control panel harness
[3] from the lower arm [2].
F-11-62
11.5.13.2 Removing the Control Panel Unit
0008-8239
/ iR8070
1) Remove the inside upper cover
2) Remove the screw [1], and detach the left upper cover (small) [2].
[3]
[1]
[1]
[5]
[6]
[7]
[2]
[5]
[4]
[4]
[2] [1]
[2]
[1]
[4]
[3]
[1]
[1]
[2]
[3]
[2]
[1]
[3]