manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Service Manual, Page: 283 / 1122

Share
Download
Canon ImageRunner iR8500 Series Service Manual Download Page 283

Chapter 5

5-31

F-5-68

4) Remove the 4 screws [1], and detach the standard white plate [2].

F-5-69

5.4.3.3 When Replacing the Standard White Plate

0008-4342

iR105i/iR105+ / iR9070

1) Check to be sure that the Execute/Memory lamp in the control panel

is OFF, and turn off the main power switch.

2) Disconnect the power plug from the power outlet.

The machine remains powered as long as its power plug is connected.

Be sure to disconnect the power plug from the power outlet.

3) Replace the standard white plate.

4) Assemble the machine, and connect the power plug; then, turn on the

main power switch.

5) Execute the following in service mode in sequence:

   COPIER> FUNCTION> CCD> CCD-ADJ

   COPIER> FUNCTION> CCD> LUT-ADJ

6) Inplement the service mode described below to the service sheet

which is to be kept in the service log book case.

   COPIER> FUNCTION> MISC-P> LBL-PRNT

7) Turn off and then on the main power switch.

5.4.3.4 When Replacing the Standard White Plate

0008-8597

1) Check to be sure that the Execute/Memory lamp in the control panel

is OFF, and turn off the main power switch.

2) Disconnect the power plug from the power outlet.

The machine remains powered as long as its power plug is connected.

Be sure to disconnect the power plug from the power outlet.

3) Replace the standard white plate.

4) Assemble the machine, and connect the power plug; then, turn on the

main power switch.

5) Execute the following in service mode in sequence:

1. COPIER>FUNCTION>CCD>CCD-ADJ

2. COPIER>FUNCTION>CCD>LUT-ADJ

6) Inplement the service mode described below to the service sheet

which is to be kept in the service log book case.

- COPIER>FUNCTION>MISC-P>LBL-PRNT

7) Turn off and then on the main power switch.

5.4.4 Scanning Lamp

5.4.4.1 Remove the Scanning Lamp/Scanning Lamp 

Heater

0007-1560

iR105i/iR105+ / iR9070

1) Remove the 2 screws [1], and detach the right glass retainer [2].

2) Shift the copyboard glass [3] to the right to detach; then, detach the

scanning lamp cover [4].

F-5-70

3) Remove the 4 screws [1], and detach the original lamp inside cover

[2].

F-5-71

4) Move the No. 1 mirror base [1] to where the scanning lamp mirror

inside cover has been removed; then, remove the 2 screws [2], and

detach the antireflection plate [3].

When moving the mirror base, be sure not to touch the mirror or the

lamp or impose force on them to avoid dirt or damage.

[1]

[1]

[2]

[1]

[2]

[1]

[3]

[2]

[1]

[4]

[2]

[1]

[1]

Summary of Contents for ImageRunner iR8500 Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments