Canon ImageRunner iR8500 Series, Service Manual, Page: 961 / 1122

Chapter 17
17-117
<MISC-P>
T-17-151
MMI Clearing the following settings in User mode
- Backup data (user-defined values) of common settings
- Various backup data (user-defined values), excluding fax
The settings are cleared when the main power switch is turned OFF and ON.
1
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
MN-CON Clearing RAM on the main controller circuit board
The RAM is cleared when the main power switch is turned OFF and ON.
1
<Operating procedure>
1) Select COPIER>FUNCTION>MISC-P>P-PRINT to print the contents of the
service mode.
2) Select this item and press the OK key.
3) Turn the main power switch OFF and ON.
4) Enter the P-PRINT output data as required.
CARD Clearing the card ID (department) related data
The card ID related data is cleared when the main power switch is turned OFF and
ON.
1
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
ALARM Clearing the alarm log
The alarm log is cleared when the main power switch is turned OFF and ON.
1
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
SND-STUP Clearing the send-read settings
The send-read settings are cleared when the main power switch is turned OFF and
ON.
2
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
CA-KEY Clearing the CA certificate and key pair
The CA certificate and key pair are cleared when the main power switch is turned
OFF and ON.
2
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
COPIER > FUNCTION > MISC-P
Sub-item Description Level
P-PRINT Printing out the service mode settings
1
<Operating procedure>
1) Select this item.
2) Press the OK key to start printing.
USER-PRT Printing out the user mode list
1
<Operating procedure>
1) Select this item.
2) Press the OK key to start printing.
LBL-PRNT Printing out the service label
1
<Operating procedure>
1) Load A4 or LTR paper on Cassette 1.
2) Select this item.
3) Press the OK key to start printing.
PRE-EXP Checking the pre-exposure lamp (LED)
1
<Operating procedure>
1) Press this item to reverse its display.
2) Press the OK key. After executing each operation for several seconds, the
machine stops automatically. (All lit)
3) Press the OK key to start printing.
Reference
If the lighting of the pre-exposure lamp gives a problem to the photoconductor
drum, rotate the drum.
KEY-HIST Printing out the operating section key input history
2
<Operating procedure>
1) Select this item.
2) Press the OK key to start printing.
COPIER > FUNCTION > CLEAR
Sub-item Description Level